PharmaLectures.com

Courses › Pharma training by line of business › What the European auditor opens first at the packaging and machinery supplier: the checklist

What the European auditor opens first at the packaging and machinery supplier: the checklist

Your team walks into the customer audit with every file the auditor opens first.

  • 8 audio modulesthree lengths each
  • 1 h 20 min to 6 h 40 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Packaging and machinery supplierwho it is written for

Why this training matters

The auditor from your pharmaceutical customer asks for the change control behind last month's software update. Nobody can find it. The inspection stops, the machine ships late, and procurement holds your next bid until the file is fixed.

What changes after this course

Your engineers hand over qualification protocols, supplier files and training records that already answer the checklist. Your own mock audit finds the gaps weeks before the customer's date. You hold a certificate for each learner and a training record for every person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your engineers read EudraLex Volume 4 and Annex 15 and know which lines apply to a packaging machine and which belong to the client. The question of what the inspector expects gets answered at the desk, not by an email to the customer's quality department. Your document control lines up with Chapter 4 before anyone asks.

Design Qualification and Installation Qualification protocols come out right the first time. Operational Qualification and Performance Qualification reports follow the order a European inspector reads them in. The client signs without a third round of comments, and your validation team gets back the days it used to spend rewriting.

Procurement spots a missing Certificate of Conformity before the part reaches the assembly line. Each sub-supplier file is complete, so an unapproved vendor never reaches the auditor's desk. Deviations and machine modifications are logged and assessed when they happen, and a small software update gets the right change control record instead of becoming a finding.

On audit day, the production manager puts the calibration schedule, maintenance log and training records on the table without a search. A mock audit built from a customer audit checklist has already found the gap in the training file. Corrective and preventive actions are written and ready, so a finding closes instead of stalling a delivery.

Who needs this training

  • Quality Manager

    The auditor asks for the change control behind last month's software update. You hand over one file with the risk assessment, approval and test result, and the project keeps moving.

  • Validation Engineer

    The client sends back your Installation Qualification protocol for missing data. You rewrite it in the order the inspector reads it, and the next version comes back signed.

  • Sales Manager for Pharmaceutical Accounts

    A buyer asks in the pitch how you handle Annex 15 and sub-supplier control. You answer from the record, not from memory, and the conversation moves on to price and delivery.

  • Documentation Specialist

    Returned Design Qualification reports stop landing on your desk. You build the first draft to the structure the client's reviewers expect, so it needs no correction round.

Roles: Quality assurance and Qualified Person, Production and engineering

Businesses: Packaging and machinery supplier

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Draft a Design Qualification that a pharmaceutical client can review against its own user requirements specification.
  2. Defend your Installation Qualification and Operational Qualification reports when a customer auditor questions them.
  3. Write a change control record for a packaging line modification that shows the risk assessment and the approval.
  4. Assemble a sub-supplier file with the Certificates of Conformity the client expects before delivery.
  5. Answer an inspector's questions on calibration and maintenance by pointing to the exact document.
  6. Run an internal mock audit from a checklist built on Annex 15 and your customers' own audit requirements.
  7. Correct personnel training records so each entry shows who was trained, on what, and how competence was checked.

What the company gets

  • The risk of a critical finding falls, because the documents an auditor opens first are complete before the visit.
  • New packaging equipment reaches client approval faster, because qualification protocols arrive in the order the reviewer expects.
  • Your quality team gives the inspector a straight answer on change control and deviation handling, with the record in hand.
  • Each learner holds a certificate and a training record, so a buyer asking about your compliance readiness sees proof, not a promise.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 8 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 20 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard3 h 20 min25 min a module, for regulatory, quality and business-development staff
Expanded6 h 40 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard3 h 20 min
Production and engineeringStandard3 h 20 min

Course outline: 8 modules

8 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Read EudraLex Volume 4 and Annex 15 the way the auditor reads them

    • Why the client's user requirements specification decides what the auditor checks against your machine.
    • How to tell which Annex 15 expectations land on you as supplier and which stay with the client.
    • The one-page map from Annex 15 to your own files that lets you point to the answer in seconds.
  2. 2Close the gaps between your quality system and Good Manufacturing Practice

    • What to do when your certified quality manual is silent on what the pharmaceutical customer asks.
    • How to match your document control to the Chapter 4 documentation rules of EudraLex Volume 4.
    • The change control record that stops a software update from becoming an audit observation.
  3. 3Draft Design and Installation Qualification protocols the client signs

    • How to write a Design Qualification the client approves on the first read, not the third.
    • The records, from as-built drawings to instrument calibration, that let Installation Qualification close.
    • Why a setup checklist that works in the workshop fails in front of a pharmaceutical inspector.
  4. 4Prove machine performance with Operational and Performance Qualification

    • How to set Operational Qualification tests around critical operating parameters, so no run is wasted.
    • The Performance Qualification runs at full speed that show your machine holds quality over time.
    • Why a machine that runs perfectly is still rejected when its Operational Qualification data is thin.
  5. 5Hand over sub-supplier files and Certificates of Conformity that stand up

    • How to arrange sub-supplier qualification files so the auditor opens one folder and moves on.
    • The Certificates of Conformity the client wants in hand before they sign the delivery note.
    • Why one unapproved sub-supplier on a bill of materials can cost you a finding on a good machine.
  6. 6Log deviations and machine modifications before they become findings

    • How to log a deviation the day it happens, so the auditor reads it as control, not as failure.
    • When a minor software update needs full change control and when it does not.
    • The steps to take when the client asks for a line modification halfway through production.
  7. 7Present calibration, maintenance and training records the inspector accepts

    • How to lay out your calibration schedule so the inspector sees each instrument and due date at once.
    • The maintenance log entries that prove your preventive work happened and worked.
    • Why a training record with signatures but no competence check fails, and the fix that passes.
  8. 8Run a mock audit and write corrective and preventive actions that hold

    • How to turn your customers' audit requirements into a checklist and find your own gaps first.
    • The corrective and preventive action wording that lets an auditor close a finding, not reopen it.
    • What a late reply to an observation does to your delivery date, and how to answer on time.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

8 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 20 min in the briefing length and 6 h 40 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Packaging and machinery supplier. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 72 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team