PharmaLectures.com

Courses › Pharma training by line of business › What the European auditor opens first at the finished-dose generic company: the checklist

What the European auditor opens first at the finished-dose generic company: the checklist

Give the European customer auditor a clean checklist and keep your supply contract.

A GMP self-inspection is the internal audit a medicine manufacturer runs on its own operations to check that it complies with good manufacturing practice and to correct gaps before others find them. Chapter 9 of the EU GMP guide requires self-inspections to be planned, documented and followed up with corrective actions. For a finished-dose generic company supplying Europe, the same checklist is what the European customer's auditor opens first: quality system, production controls, laboratory data integrity and supplier management. This course turns that customer audit checklist into a self-inspection plan.

  • 8 audio modulesthree lengths each
  • 1 h 20 min to 6 h 40 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Finished-dose generic companywho it is written for

Why GMP self-inspection training matters

The auditor from your European buyer opens the batch records first and stops at an in-process check signed a day late. By evening it is a critical finding, the buyer holds new orders, and your team spends the following weeks drafting a response instead of running the line.

What changes after this course

Your team opens the right file the moment the auditor asks, and answers from the procedure instead of from memory. You hold a certificate for each learner and a training record for each person, ready for the customer's next request.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

GMP self-inspection training: what this course gives your people

Your quality assurance team hands over the Site Master File and the procedures without a night of last-minute edits. They know what EudraLex Volume 4 Chapter 4 expects from documentation, so the first document review is short and the visit starts on good terms.

Production managers sign batch records knowing the in-process checks meet EudraLex Volume 4 Chapter 5. When the auditor asks about a deviation, the person who handled it answers from the record, without waiting for a supervisor to arrive.

In the laboratory, the head of quality control walks the auditor through an out-of-specification investigation under Chapter 6, from first result to conclusion. Equipment qualification files under Annex 15 are found in minutes, and electronic records sit beside every printout, so data integrity questions end quickly.

Supply chain and quality staff review supplier files against Chapter 5 and the International Council for Harmonisation Q10 guideline before the buyer does. Gaps get fixed, and the formal audit response goes out by the agreed date, with corrective actions the customer accepts and your quality system tracks to closure.

Who needs GMP self-inspection training

  • Quality Assurance Manager

    Before a customer visit, you check the Site Master File against the EudraLex Volume 4 explanatory notes and your procedures against Chapter 4 once, and you stop reopening documents the night before the auditor arrives.

  • Production Manager

    When the auditor stands at the packaging line and asks about last month's deviation, you answer from the batch record and the in-process check, not from memory or a phone call.

  • Quality Control Laboratory Head

    When the auditor asks for the out-of-specification file and the balance records together, you hand over both, and the electronic data matches the printout in front of them.

  • Supply Chain Director

    When the auditor picks a critical raw material at random, your supplier file shows the qualification, the audit report and the signatures, so the question ends there.

Roles: Quality assurance and Qualified Person, Production and engineering

Businesses: Finished-dose generic company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Name the EudraLex Volume 4 chapters a customer auditor opens first and prepare the matching records for each one.
  2. Assign each team member a place in the front room or the back room before the audit visit starts.
  3. Revise procedures and the Site Master File to meet EudraLex Volume 4 Chapter 4 and close open change controls.
  4. Record in-process controls in the batch record as Chapter 5 requires, and act correctly when one fails.
  5. Present an out-of-specification investigation together with the matching Annex 15 equipment qualification files without delay.
  6. Check a critical raw material supplier file for missing signatures before the customer auditor does.
  7. Write a corrective action response with wording the buyer accepts, and ask for extra time when you need it.

What the company gets

  • Lower the risk that a critical finding at a customer audit turns into a held order from a European buyer.
  • Keep the production line running, because only the people the auditor needs step away from their work during the visit.
  • Give the auditor straight answers on production, quality control and suppliers, backed by documents your team can find quickly.
  • Hold a certificate for each learner and a training record for each person, ready to show when the customer asks.
  • Spend less time drafting corrective action plans, because fewer findings reach the audit report in the first place.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 8 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 20 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard3 h 20 min25 min a module, for regulatory, quality and business-development staff
Expanded6 h 40 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard3 h 20 min
Production and engineeringStandard3 h 20 min

GMP self-inspection course outline: 8 modules

8 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Predict which EudraLex Volume 4 chapters a customer auditor opens first

    • Why a customer auditor opens different pages than a national competent authority inspector.
    • The EudraLex Volume 4 chapters that decide whether the first hour is calm or tense.
    • How to read the audit agenda and know which records the auditor requests before arrival.
  2. 2Run the customer audit visit with every person in the right room

    • What to put in the pre-audit information pack so the auditor arrives with fewer questions.
    • How to assign who sits in the front room and who fetches files from the back room.
    • When to walk the auditor through your plan and when to follow their lead on the floor.
  3. 3Correct your quality documentation to EudraLex Volume 4 Chapter 4

    • Why an out-of-date Site Master File draws the first question, and how to correct it today.
    • The procedure revisions that bring your documents into line with EudraLex Volume 4 Chapter 4.
    • How to close open change controls before the auditor asks to see the change log.
  4. 4Align production and in-process controls with EudraLex Volume 4 Chapter 5

    • How to record in-process checks so the batch record passes EudraLex Volume 4 Chapter 5.
    • The batch record gaps that make an auditor stop reading and start writing.
    • What to do when an in-process control fails in the middle of a commercial run.
  5. 5Defend your quality control laboratory against data integrity findings

    • How to present an out-of-specification investigation so the auditor can follow it in one pass.
    • Why printed balance tickets without the electronic record raise a data integrity finding.
    • The equipment qualification files under Annex 15 your analyst can pull while the auditor waits.
  6. 6Qualify suppliers and release materials to European expectations

    • What the auditor checks first in the file of a critical raw material supplier.
    • How to show that incoming materials are stored and handled as Chapter 5 expects.
    • The missing signature on a supplier audit report that turns a comment into a major finding.
  7. 7Write audit responses and corrective actions the buyer accepts

    • How to dispute a finding you think is wrong without losing the auditor's goodwill.
    • The wording that turns a vague corrective action into a plan the buyer signs off.
    • What to do when you need more days to send the formal audit response.
  8. 8Prove continuous improvement by tracking every post-audit action

    • How to track each corrective action to its owner and date so none slips past the deadline.
    • The internal audit that shows whether a change really worked, in the form Chapter 9 expects.
    • Why feeding customer comments into your quality system stops the next auditor finding the same flaw.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about GMP self-inspection training

What does EU GMP Chapter 9 require for self-inspections?

Chapter 9 requires self-inspections to monitor how good manufacturing practice is implemented and to propose corrective measures. They should follow a pre-arranged program, be carried out independently and in detail by designated competent people, and be recorded in reports covering observations and proposed corrective actions. Statements on the actions taken afterwards should also be recorded.

Why do European customers audit generic manufacturers?

A European marketing authorisation holder stays responsible for the quality of its products even when another company makes them. Chapter 7 of the EU GMP guide requires the contract giver to assess the competence of the contract acceptor and to keep oversight. Customer audits are how buyers meet that duty, and critical findings can delay or end a supply contract.

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

8 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 20 min in the briefing length and 6 h 40 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Finished-dose generic company. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 72 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team