PharmaLectures.com

Courses › Pharma training by line of business › What the European auditor opens first at the contract manufacturer (CDMO): the checklist

What the European auditor opens first at the contract manufacturer (CDMO): the checklist

Your team puts the right file in the auditor's hand before the second question comes.

  • 8 audio modulesthree lengths each
  • 1 h 20 min to 6 h 40 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Contract manufacturer (CDMO / CMO)who it is written for

Why this training matters

The auditor asks for the Site Master File and nobody can find the current version. The silence stretches, the inspector turns to your batch records, and a routine visit becomes a major deficiency. Your client's launch waits on your answer.

What changes after this course

Your staff answers at the table and in the cleanroom corridor, and hands over the right EudraLex Volume 4 documents on the first request. You hold a certificate for each learner and a training record per person that shows who is ready.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your team stops guessing what the auditor wants first. Technical agreements, the Site Master File and the EudraLex Volume 4 documents sit where people can reach them. When the auditor raises European Union Good Manufacturing Practice (EU GMP) Chapter 7, your Quality Assurance Manager points to the clause that splits duties with the contract giver, and the Annex 16 checks are already in the batch file.

The walk-through stops being a source of dread. Your Head of Production guides the auditor past the critical areas and explains material flow in a few plain sentences. When an operator is asked about environmental monitoring or gowning, the answer matches the standard operating procedure on the wall, so the inspector has no reason to detour.

Quality Control hands over method validation reports that answer the question before it is asked. The audit trail for each laboratory system is ready, in line with Annex 11 on computerised systems. An out-of-specification result becomes a short, documented discussion instead of the thread the auditor pulls for the rest of the day.

After the closing meeting, you write a reply that gives root cause, action and date for each observation. Your Corrective and Preventive Actions change behaviour on the floor, and your Chapter 9 self-inspection programme shows the national competent authority that readiness continues after the inspector leaves.

Who needs this training

  • Quality Assurance Manager

    The week before the inspection is no longer a scramble. They assign speaking roles, stage the front and back rooms, and keep document requests moving while the auditor is still on site.

  • Head of Production

    The auditor stops at the gowning area and asks about cross-contamination. This person answers in plain words and points to the material flow controls that protect the client's product.

  • Quality Control Lead

    Raw data used to start an afternoon of questions. They now present method validation and audit trails in the order a European inspector reads them, and know what to hand over for an out-of-specification result.

  • Regulatory Affairs Specialist

    After the closing meeting, they help draft the post-audit response and judge whether a finding touches the dossier held by the marketing authorisation holder.

Roles: Quality assurance and Qualified Person, Production and engineering

Businesses: Contract manufacturer (CDMO / CMO)

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Draft a technical agreement whose clauses match EU GMP Chapter 7 and name who owns each duty.
  2. Sort documents into a front room and a back room and assign a named speaker to each topic.
  3. Walk an auditor through the facility and explain material flow without leaving the planned route.
  4. Show the audit trail for a laboratory system and hand over the right file for an out-of-specification result.
  5. Write a deviation report that states the root cause and links it to evidence.
  6. Ask clarifying questions in the closing meeting and tell critical, major and other deficiencies apart.
  7. Submit a post-audit response with root cause, action and date for each observation.

What the company gets

  • Your site enters a European inspection with a team that knows who answers what and where each document sits.
  • The Site Master File, the technical agreements and your opening presentation say the same thing, so the auditor finds no gap to dig into.
  • Your clients see a site that handles regulatory scrutiny calmly, which protects the launch dates they have promised their own markets.
  • You hold a certificate for each learner and a training record per person, ready to show when an inspector asks who is trained.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 8 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 20 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard3 h 20 min25 min a module, for regulatory, quality and business-development staff
Expanded6 h 40 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard3 h 20 min
Production and engineeringStandard3 h 20 min

Course outline: 8 modules

8 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Align your technical agreements with EU GMP Chapter 7

    • How to split duties in the technical agreement so no clause leaves the auditor asking who owns it.
    • Why Chapter 7 expects you to show the contract giver's approval before any work goes to a subcontractor.
    • What Annex 16 makes your Qualified Person check before certifying a batch made under contract.
  2. 2Stage your documents and brief your team before the auditor arrives

    • Which documents sit in the front room, and which stay in the back room until someone asks.
    • The speaking-role list that stops two people giving the auditor two different answers.
    • How to brief operators so they answer the question asked and then stop.
  3. 3Open the inspection with a meeting that sets the right tone

    • Why the Site Master File and your opening presentation must say the same thing.
    • How to describe your quality policy in plain words that match what the floor actually does.
    • When to introduce your subject matter experts, and how to set the limits of what each one answers.
  4. 4Guide the auditor through your site without triggering new questions

    • How to route the tour past critical areas without hiding anything or inviting a detour.
    • What to say when the inspector stops to watch an operator gown for the cleanroom.
    • The material flow explanation that shows the auditor how you keep products from mixing.
  5. 5Hand over Quality Control data and methods the way auditors expect

    • How to present method validation reports so the auditor finds the answer on the first page.
    • The audit trail you show for each laboratory system, and how to pull it without a hunt.
    • What to hand over the moment the inspector asks about an out-of-specification result.
  6. 6Prove your Corrective and Preventive Actions fix the root cause

    • Why a deviation report that stops at operator error invites the next, harder question.
    • How to show a Corrective and Preventive Action changed what operators do, not only what is written.
    • What to say about an overdue action so it reads as managed, not ignored.
  7. 7Clarify findings in the closing meeting before the report is written

    • How to question a preliminary finding without sounding like you are arguing the point.
    • The difference between critical, major and other deficiencies, and what each does to your timeline.
    • What to answer when the auditor asks whether you agree with the assessment.
  8. 8Write a post-audit response that satisfies the competent authority

    • How to answer the observation itself, with root cause, action and date, and no excuses.
    • The follow-up schedule that tells the competent authority your gaps are closing.
    • Why your Chapter 9 self-inspection programme is the evidence that you stay ready between audits.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

8 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 20 min in the briefing length and 6 h 40 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Contract manufacturer (CDMO / CMO). Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 72 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team