PharmaLectures.com

Courses › Pharma industry foundations › Quality Agreements and Technical Agreements: every clause, and why it is there

Quality Agreements and Technical Agreements: every clause, and why it is there

Your team writes quality agreements that keep a held batch from becoming a dispute.

  • 6 audio modulesthree lengths each
  • 1 h to 5 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • QA, BD, CDMO staffwho it is written for

Why this training matters

A contract manufacturer ships a batch with a deviation still open. Your quality assurance team will not release it, and the quality agreement sets no deadline for closing deviations. The batch sits in quarantine while two companies read the same contract and find different answers.

What changes after this course

Your team drafts agreements that name who owns each Good Manufacturing Practice task, and they catch the missing clause before anyone signs. You hold a certificate per learner and a training record per person to show the next inspector.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

A deviation arrives late and nobody calls legal to ask who owns it, because the agreement already says. Your team drafts Quality Agreements that tie each clause to Good Manufacturing Practice, name the owner of batch release and complaint handling, and meet what European Union Good Manufacturing Practice Chapter 7 and Food and Drug Administration 21 Code of Federal Regulations Part 211 expect.

Technical Agreements stop being a pile of attachments. Your staff set out scope, communication lines and process parameters in the annex, and they find the missing detail before signature, not during a supplier audit or an inspection.

Business development sits in the negotiation and sees the operational cost of each proposed term. They push back on the clause that puts compliance at risk, and the paperwork they hand over holds up when a national competent authority reads it. Nobody at your site has to explain who approved a critical process change.

Your quality unit draws the line between technical detail and quality oversight, using International Council for Harmonisation Q10 as the guide. Partners stop misreading what you expect from outsourced work, because each document holds only what belongs in it.

Who needs this training

  • Quality Assurance Manager

    Outsourced contracts reach your desk with quality duties left vague. After this course your team sends back drafts that already meet European Union Good Manufacturing Practice Chapter 7, so you stop rewriting them.

  • Business Development Lead

    A client stalls the deal because your proposal leaves quality duties open. You send clear, compliant quality agreements instead, and signing moves forward without another round of questions.

  • Contract Manufacturing Specialist

    You argue over who owns a deviation or a change control. With the answer written into the agreement, the argument ends after one reading and the batch keeps moving.

  • Supplier Quality Auditor

    You audit a contract manufacturer and find nothing in the agreement to hold them to. You start asking for specific clauses you can verify against Good Manufacturing Practice on site.

Roles: Business development and export sales, Quality assurance and Qualified Person

Businesses: Contract manufacturer (CDMO / CMO)

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Draft Quality Agreement clauses that cite the right chapters of European Union Good Manufacturing Practice.
  2. Structure a Technical Agreement annex that matches the process steps actually run at the manufacturing site.
  3. Assign deviation investigation and batch release to a named party, with a deadline, in plain contract wording.
  4. Spot a missing compliance commitment in a draft contract before anyone signs it.
  5. Assemble the documents an inspector asks for to verify that you oversee the agreement.
  6. Explain the operational purpose of any clause to an auditor in a single sentence.

What the company gets

  • Held batches caused by vague duties for outsourced tasks become far less likely, because each task has a named owner in the signed agreement.
  • Your agreements are ready for review by any inspector, with a training record and a certificate for every learner behind them.
  • Your staff reach for ready wording when they negotiate, so contracts close faster and with fewer open points.
  • Disputes with partners over operational duties are settled on paper before the first batch is made.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 6 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard2 h 30 min25 min a module, for regulatory, quality and business-development staff
Expanded5 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Business development and export salesBriefing1 h
Quality assurance and Qualified PersonStandard2 h 30 min

Course outline: 6 modules

6 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Draft Quality and Technical Agreements that meet Good Manufacturing Practice

    • Why European Union Good Manufacturing Practice Chapter 7 keeps you answerable for work you outsource.
    • How to split quality duties from technical detail so no task ends up with nobody.
    • What to do when a partner says the supply agreement already covers quality, and it does not.
  2. 2Draft the core Quality Agreement clauses that give each duty one owner

    • The clause list that gives batch release, testing and change control one named owner each.
    • How to write the Quality Management System clause so your partner's procedures can be checked.
    • Why a change control clause needs a notice period, and how to word it so a change cannot slip through.
  3. 3Write deviation, complaint and recall clauses that name who acts and by when

    • Who investigates a deviation, who signs the report, and the deadline that ends the quarantine dispute.
    • How to word complaint and return handling so each report reaches the right desk in time.
    • The recall clause that tells your partner what to do the hour you call.
  4. 4Structure Technical Agreements so the annex matches what the site really runs

    • What belongs in the annex so the main contract stays short and still holds up.
    • How to write process parameters and analytical methods so the batch record and the agreement agree.
    • The specification clauses that stop a delivered batch being rejected over a disputed limit.
  5. 5Negotiate clauses that protect your supply chain and your compliance

    • How to push back on a vague term in one email, with wording your partner can accept.
    • When an aging technical agreement needs an update, and when leaving it alone is safe.
    • What to do when a partner refuses a standard Good Manufacturing Practice clause.
  6. 6Prove to an inspector that your partner follows the agreement you signed

    • How to show an inspector that your partner follows the contract, not only that you signed it.
    • The documents that prove you enforce each clause, laid out so you can find them in minutes.
    • Why a planned review of responsibilities removes a finding before the inspector writes it.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

6 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h in the briefing length and 5 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for QA, BD, CDMO staff. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 54 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team