PharmaLectures.com

Courses › GMP, GDP, quality and compliance › Audit or be audited: supplier qualification the way Europeans do it to you

Audit or be audited: supplier qualification the way Europeans do it to you

Your suppliers pass the European audit, and your batches ship on time.

A GMP audit is a planned, documented review of a manufacturer or supplier against good manufacturing practice, done by a customer, a contract giver or the company itself rather than by a regulator. European medicines companies must audit the makers of their active substances under Article 46(f) of Directive 2001/83/EC, and EU GMP Chapter 5 requires documented qualification of material suppliers. That is why an exporter to Europe gets audited, and why its own purchasing team must audit the suppliers behind it.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • QA, purchasingwho it is written for

Why GMP audit training matters

An inspector from your national competent authority asks for the qualification file on a critical raw material supplier. The questionnaire is half filled in and no one wrote down the risk level. The inspector records a major observation, and the batch waits.

What changes after this course

Your purchasing and quality teams build the supplier file so it answers the auditor before the question comes. They rank suppliers by risk, audit the ones that matter and close findings on time. You hold a certificate for each learner and a training record for each person, ready for inspection day.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

GMP audit training: what this course gives your people

Your purchasing team stops signing the supplier's standard contract and drafts a written quality agreement that follows EudraLex Volume 4 expectations. Each new supplier gets a risk category on day one, so your quality unit spends its audit hours on the critical raw material source and not on the low-impact packaging vendor.

When an inspector from your national competent authority asks for the supplier master file, your Quality Assurance manager opens one organized dossier. It shows the risk assessment, the Chapter 5 qualification steps and the link to Annex 16 that your Qualified Person relies on at certification. The inspector finds the answer and moves to the next item.

On a supplier walk-through, your auditors work from a checklist built for that site's scope. They record what they see, classify each finding as minor, major or critical, and write a report that states facts. The supplier has little room to argue and little reason to delay the corrective and preventive actions.

Questionnaires get read for red flags before the supplier is approved, and failing suppliers leave your list on a plan, not in a panic. Re-qualification dates follow documented risk, so a slipping supplier shows up in your data before it shows up in a held batch.

Who needs GMP audit training

  • Quality Assurance Manager

    An inspector asks for the qualification record of a critical raw material supplier. You hand over a file built to EudraLex Volume 4, Chapter 5, with the risk reasoning already written down.

  • Purchasing Manager

    A critical raw material vendor must be onboarded before the next production slot. You send a risk-based questionnaire, read the answers for red flags and decide on approval without a long wait.

  • Supplier Quality Auditor

    A supplier disputes a finding in your report. You point to the evidence you recorded and the classification criteria behind it, and the talk moves to the corrective action.

  • Regulatory Affairs Specialist

    You review a supplier dossier that supports a marketing authorization application. You see the missing evidence at once and send it back to quality before it reaches the European Medicines Agency.

Roles: Quality assurance and Qualified Person, Supply chain, purchasing and logistics

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Sort suppliers into risk categories and set the audit effort for each one.
  2. Read a pre-qualification questionnaire and mark the answers that call for an on-site audit.
  3. Answer an inspector's question with the right record and no unrequested extras.
  4. Write an audit report that classifies each non-conformance as minor, major or critical and cites the evidence.
  5. Set closing dates for corrective and preventive actions that match the risk of the finding.
  6. Remove a failing supplier from your approved list by a documented, step-by-step route.

What the company gets

  • Suppliers are qualified to European standards before the first order, so production lines are not waiting on a late approval.
  • Inspectors get a complete qualification file for each critical supplier, and the questions they ask have an answer on the page.
  • Your quality team stops spending hours on audits that end in vague reports and fixes nobody tracks.
  • Each learner receives a certificate, and you hold a per-person training record for your files, ready on inspection day.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonExpanded8 h 20 min
Supply chain, purchasing and logisticsExpanded8 h 20 min

GMP audit course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Map European Union Good Manufacturing Practice rules to each supplier

    • How to spot which supplier relationships need a written quality agreement, not a price list.
    • Why a standard vendor contract leaves a gap an inspector finds in minutes.
    • The Annex 16 link that shows your Qualified Person which supplier records back batch certification.
  2. 2Build a supplier qualification program that satisfies Chapter 5

    • How to sort suppliers by product impact so your audit hours go to the critical raw materials.
    • The documents that make a supplier master file complete the first time an inspector opens it.
    • When to approve a supplier on condition and when to hold approval until the proof arrives.
  3. 3Spot the red flags in a pre-qualification questionnaire

    • The answers in a questionnaire that signal a quality problem the supplier hopes you miss.
    • How to judge a supplier's quality system from paper alone, before you spend on travel.
    • What turns a routine paper review into an on-site audit you can justify in writing.
  4. 4Prepare your quality management system for a European audit

    • What an inspector opens first in your supplier files, so you check it before they do.
    • How to arrange your quality management system so each question leads to one clear document.
    • Why the usual preparation shortcuts end in a critical observation, and what to do instead.
  5. 5Answer competent authority inspectors without hesitation

    • How to put the record in the inspector's hand so the question ends there.
    • Why a short, direct answer protects you better than a helpful extra detail.
    • What to do when the inspector words a negative observation in the closing meeting.
  6. 6Prioritize your annual audit plan by supplier risk profile

    • How to write an annual audit plan whose order you can defend to an inspector in one sentence.
    • The line between a routine audit and a for-cause audit, and which one gets your next free day.
    • Why scheduling audits by calendar date fails the risk test, and what replaces it.
  7. 7Gather objective evidence on a supplier facility walk-through

    • How to build a checklist that fits this supplier's scope instead of a generic template.
    • The walk-through questions that bring hidden non-conformances into view on the shop floor.
    • What to say in the opening meeting so the supplier knows the limits of your audit.
  8. 8Write factual audit reports that classify non-conformances correctly

    • How to classify a finding as minor, major or critical without second-guessing yourself.
    • The order of sections that makes your audit report read as fact, not opinion.
    • Why vague evidence wording hands the supplier a reason to delay, and how to close that gap.
  9. 9Close corrective and preventive actions within risk-based timelines

    • How to test a supplier's reply and see whether the proposed fix will actually work.
    • The risk-based closing times that decide how long a finding may stay open.
    • What to do when a supplier misses the date for a preventive action.
  10. 10De-qualify a failing supplier before it disrupts your supply

    • The early signs in delivery and quality data that show a supplier slipping before a batch fails.
    • How to set a re-qualification date for each supplier from its documented risk level.
    • The steps that remove a failing supplier from your list without stopping the production line.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about GMP audit training

What is a GMP audit?

A GMP audit is an on-site or remote examination of a supplier or manufacturing site against the GMP rules and the contract, carried out by trained auditors from the customer or an agent acting for it. It produces a report with graded findings and a CAPA plan, and the customer uses that report to approve, condition or reject the supplier. Regulators inspect; customers and companies audit.

Do you need a lead auditor certificate to audit a supplier?

No law requires one. EU GMP asks that staff be trained for their tasks, and ISO 19011 gives the generally used guidance on auditor competence and audit programmes. A lead auditor course is one way to show competence, but a documented record of GMP knowledge, audit training and audit experience is the kind of evidence a Qualified Person or an inspector may ask to see when they question an audit report.

What does a European customer audit?

A European customer audits the whole chain behind the material: your quality system, your own supplier approval, data integrity on test records, deviation and change handling, cleaning and cross-contamination controls, the training of the people on the line, and the traceability from raw material to shipped lot. They are collecting the evidence their Qualified Person needs under Annex 16 to rely on your certificate of analysis, so gaps there cost you the contract.

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for QA, purchasing. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team