PharmaLectures.com

Courses › Country and business playbooks › Selling into Europe as a packaging and machinery supplier from Pakistan, Bangladesh and Vietnam

Selling into Europe as a packaging and machinery supplier from Pakistan, Bangladesh and Vietnam

Your quotes reach European pharmaceutical buyers with the paperwork already in order.

  • 12 audio modulesthree lengths each
  • 2 h to 10 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Pakistan, Bangladesh and Vietnam, Packaging and machinery supplierwho it is written for

Why this training matters

Your machine sits at a German port because the Declaration of Conformity is missing a required line. The client's sterile line waits, and their project manager writes that the contract is at risk. Your sales engineer has no answer on EudraLex Volume 4.

What changes after this course

Your engineers build technical files that are ready the day a market surveillance authority asks. Your sales team quotes machinery that fits the Machinery Directive and the Good Manufacturing Practice needs of the buyer. You hold a certificate per learner and a training record for each person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your sales engineers stop saying they will check and come back. On a client call they place your machine against EudraLex Volume 4 and Annex 15, and they say what the buyer's quality unit will ask for. Your design team picks surfaces and seals with Annex 1 in mind, before the drawing is frozen.

The technical file for Machinery Directive 2006/42/EC leaves your desk complete. Your engineers know whether a pressure part falls under Directive 2014/68/EU and which conformity route fits it. Your compliance lead signs the Declaration of Conformity with the content Annex II lists, without sending it to an outside consultant first.

Electrical design review changes. Your panel builders work from EN 60204-1 from the first drawing, and your test report cites the EN 61000 series for Directive 2014/30/EU. When an authority asks for the EN ISO 12100 risk assessment, you open it instead of writing it.

Crates stop waiting at the border because your logistics and legal staff close the gaps. They choose the Incoterms 2020 rule on purpose, match the tariff code to the invoice description, and attach proof of origin when the buyer needs it. Warranty and payment clauses are written before the contract goes out for signature.

Who needs this training

  • Export Sales Manager

    The buyer's engineer asks how your filling machine fits Annex 1 and EudraLex Volume 4. After this course, you answer in the meeting, and the quote moves forward instead of waiting for a technical reply.

  • Quality Assurance Director

    A European customer sends a supplier audit and asks for your ISO 9001:2015 records and technical file. You answer from one prepared set, not from a scramble across engineering, purchasing and the factory floor.

  • Product Development Engineer

    At the design review, a pressure vessel, a control panel and a motor each raise a different compliance question. You sort them early, so no redesign lands after the drawings are frozen.

  • Supply Chain and Logistics Head

    A crate reaches a European port and the officer compares the invoice, the packing list and the tariff code. Yours match, and the Incoterms 2020 rule in the contract says who handles the next step.

Roles: Owner, CEO and board, Business development and export sales, Regulatory affairs, Quality assurance and Qualified Person

Businesses: Packaging and machinery supplier

Countries: Pakistan, Bangladesh and Vietnam

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Decide whether a machine needs a Notified Body under Machinery Directive 2006/42/EC or only your own assessment.
  2. Build a technical file and an EN ISO 12100 risk assessment that a market surveillance officer can follow.
  3. Write a Declaration of Conformity with every item that Annex II of the Machinery Directive requires.
  4. Sort the pressurized parts of a machine under Pressure Equipment Directive 2014/68/EU and name the conformity route that fits.
  5. Cite the EN 61000 series and EN 60204-1 in your file to show compliance with Directives 2014/30/EU and 2006/42/EC.
  6. Choose an Incoterms 2020 rule and match the tariff code and origin documents to the shipment.
  7. Select surfaces, seals and welds that support a client's Annex 1 contamination control strategy.

What the company gets

  • The risk of a machine held at the border for a missing CE mark file or Declaration of Conformity goes down.
  • Technical files for Machinery Directive 2006/42/EC are complete before the quote is accepted, so nobody writes them in a hurry after the order.
  • Your sales team gives European pharmaceutical buyers a straight answer on EudraLex Volume 4, Annex 1 and ISO 9001 in the first meeting.
  • A certificate per learner and a per-person training record show an auditor who on your team completed each module and passed its recorded multiple-choice questionnaire.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 12 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing2 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard5 h25 min a module, for regulatory, quality and business-development staff
Expanded10 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Owner, CEO and boardBriefing2 h
Business development and export salesBriefing2 h
Regulatory affairsStandard5 h
Quality assurance and Qualified PersonStandard5 h

Course outline: 12 modules

12 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Pick the European pharmaceutical markets where your machinery sells first

    • Why a quote that wins at home stalls in a German or French pharmaceutical purchasing review.
    • How to find the European buyers whose plants need your type of machine, and skip the rest.
    • The questions to ask a European buyer before you spend a month on a proposal.
  2. 2Apply EudraLex Volume 4 to qualify your equipment at the client's plant

    • What EudraLex Volume 4 lets a client's quality unit ask of your machine before installation.
    • How Annex 15 turns your factory acceptance test into records the client can reuse.
    • What to do when a client's quality team asks for a document your quote never mentioned.
  3. 3Affix the CE mark to machinery bound for the European Economic Area

    • Why a CE mark on the nameplate means little if the file behind it is thin.
    • How to follow the sequence from essential requirements to a correctly marked machine.
    • The nameplate details that must be on the machine when it leaves your dock.
  4. 4Issue a valid Declaration of Conformity under Machinery Directive 2006/42/EC

    • How to decide in minutes whether your machine needs a Notified Body or only your own assessment.
    • The items Annex II requires on a Declaration of Conformity, so no buyer sends it back.
    • What to do on the day an authority asks you to prove compliance with 2006/42/EC.
  5. 5Assess pressurized components against Pressure Equipment Directive 2014/68/EU

    • When a vessel, pipe or hose on your machine falls under Directive 2014/68/EU and when it does not.
    • How to read the category your equipment lands in and what it means for your conformity route.
    • Why Module H suits a supplier who builds pressure parts in series, and what it asks of your factory.
  6. 6Prove compliance with Electromagnetic Compatibility Directive 2014/30/EU

    • How to cite the EN 61000 series in your file so one test report holds up in review.
    • The documents that answer a client who says your machine disturbs their other equipment.
    • What to do when a pre-shipment test fails on emissions or immunity.
  7. 7Remove electrical hazards using Low Voltage Directive 2014/35/EU standards

    • Why the electrical requirements of Machinery Directive 2006/42/EC decide how you wire, earth and guard a control panel.
    • How EN 60204-1 gives your panel builders one checklist that European inspectors recognise.
    • When Directive 2014/35/EU applies and when 2006/42/EC covers the electrical risk of your machine.
  8. 8Pass market surveillance with complete EN ISO 12100 risk assessments

    • How to build a risk assessment file that a market surveillance officer can follow in one sitting.
    • The order of EN ISO 12100 steps: limits, hazards, risk estimate, risk evaluation, risk reduction.
    • Why a missing hazard in your file can cost you the sale before price comes up.
  9. 9Align your operations with ISO 9001 quality system expectations

    • How ISO 9001:2015 records give you a straight answer when a buyer audits your factory.
    • The clauses a pharmaceutical supplier audit leans on, from document control to corrective action.
    • Why a repeat fault found in Europe traces back to one process, and how to close it.
  10. 10Design sterile packaging machinery that supports Annex 1 compliance

    • How to choose surfaces, welds and seals that a sterile plant's contamination control strategy can accept.
    • What a cleanroom engineer looks for when your machine arrives at a Grade A or B area.
    • When a design detail helps the client with Annex 1 and when it forces them to ask for a change.
  11. 11Draft supply agreements with Incoterms 2020 that prevent delivery disputes

    • How to choose between Free Carrier, Delivered at Place and Delivered Duty Paid under Incoterms 2020.
    • The warranty and acceptance clauses a European buyer expects before signing a machinery contract.
    • What to write in the payment terms when installation and commissioning run for months.
  12. 12Clear European customs with the correct tariff codes and documents

    • How to find the right tariff code for a filling or packaging line and defend it at the border.
    • The documents that go with the machine: commercial invoice, packing list and proof of origin.
    • Why a wrong description on the invoice holds a machine at customs while the client's line waits.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

12 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 2 h in the briefing length and 10 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Pakistan, Bangladesh and Vietnam, Packaging and machinery supplier. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 108 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team