PharmaLectures.com

Courses › Country and business playbooks › Selling into Europe as a packaging and machinery supplier from Korea

Selling into Europe as a packaging and machinery supplier from Korea

Your sales team answers European compliance questions in the meeting, not a week later.

  • 12 audio modulesthree lengths each
  • 2 h to 10 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Korea, Packaging and machinery supplierwho it is written for

Why this training matters

A packaging line from Korea sits at a German port because the customs declaration has no valid Economic Operator Registration and Identification number. The client's installation date slips and your engineers rewrite the technical file while the buyer reads the delay clause.

What changes after this course

Your engineers draft the Declaration of Conformity before the machine leaves Korea. Your sales reps answer EudraLex Volume 4 Annex 1 questions across the table. You hold a certificate and a training record for each learner, backed by a recorded questionnaire per module.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

A buyer's engineer asks in the meeting how your line meets Machinery Directive 2006/42/EC, and your sales engineer answers from the technical file instead of promising a callback. The Declaration of Conformity leaves your office right the first time, with no wait for outside legal review. The same person explains which EudraLex Volume 4 Annex 1 contamination controls your design supports.

Port holds stop. The shipping team enters the Economic Operator Registration and Identification number on the customs declaration before the crate leaves Korea, and the forwarder receives the commercial invoice, packing list and tariff code in one pack. The machine reaches the client's dock on the agreed date, so the delay clause in your contract stays unread.

When the client's auditor arrives, your quality manager hands over Installation, Operational and Performance Qualification records that follow EudraLex Volume 4 Annex 15. Audit trails and user roles on your control software follow Annex 11, so the electronic records review starts from a documented, defensible position. The service log shows each incident report with its date.

Before the first call, the sales manager maps the buyer's site, the national authority above it, and the people in engineering, quality and procurement who decide. The quote that follows answers their regulatory question before they ask it, and a cheaper competitor finds it harder to match.

Who needs this training

  • European Sales Manager

    A buyer's quality head asks in the first meeting how your line meets CE marking rules. A straight answer keeps your quote on the shortlist; a callback hands the question to a competitor.

  • Regulatory Affairs Specialist

    The technical file for a new line takes weeks when nobody agrees what Annex VII of Machinery Directive 2006/42/EC requires. You get the structure before the first page is written.

  • Export and Logistics Manager

    Your forwarder calls from the port because the customs declaration lacks the Economic Operator Registration and Identification number. You fix the paperwork before the crate is closed, not after the hold.

  • Quality Assurance Director

    A client auditor opens your Operational Qualification protocol and starts asking questions. You arrive with Annex 15 records, audit trails and a corrective action plan format already prepared.

  • Service and Field Engineering Manager

    A fault at a client's plant needs a report the same day. Your engineers know whom to tell, in which order, and what the service log must show.

Roles: Owner, CEO and board, Business development and export sales, Regulatory affairs, Quality assurance and Qualified Person

Businesses: Packaging and machinery supplier

Countries: Korea

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Draft a Declaration of Conformity that carries every item Annex II of Machinery Directive 2006/42/EC asks for.
  2. Apply for the Economic Operator Registration and Identification number and enter it correctly on a customs declaration.
  3. Build a technical file following Annex VII so an inspector finds each answer in one place.
  4. Write Installation, Operational and Performance Qualification protocols against a client's acceptance criteria, following EudraLex Volume 4 Annex 15.
  5. Set up audit trails and user roles on machine software in line with EudraLex Volume 4 Annex 11.
  6. Report a serious malfunction to a European client in the order their quality unit expects.
  7. Answer an auditor's question on EudraLex Volume 4 Annex 1 contamination control for your own design.

What the company gets

  • Your technical files reach the buyer's reviewer complete, so the first submission is not the first of three.
  • Sales cycles shorten because representatives answer regulatory questions in the meeting without calling headquarters.
  • Shipments reach European docks with the right registration number on the declaration, and your logistics department stops taking port-hold calls.
  • Your quality department meets client auditors with qualification records, audit trails and a corrective action plan format already prepared.
  • Each learner finishes with a certificate and a training record you can show a buyer who asks who on your team is trained.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 12 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing2 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard5 h25 min a module, for regulatory, quality and business-development staff
Expanded10 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Owner, CEO and boardBriefing2 h
Business development and export salesBriefing2 h
Regulatory affairsStandard5 h
Quality assurance and Qualified PersonStandard5 h

Course outline: 12 modules

12 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Map the European market and the authority that regulates each buyer's site

    • How to find which national authority inspects your buyer's site before you write the first quote.
    • Why the European Medicines Agency is not the body that inspects your buyer, and who is.
    • How to read a buyer's regulatory footprint so your first call reaches the person who owns the line.
  2. 2Apply Good Manufacturing Practice and EudraLex Volume 4 Annex 1 to your design

    • Why Chapter 3 of EudraLex Volume 4 makes cleanability a buying reason, and how to show it in drawings.
    • The Annex 1 contamination control points a sterile-line buyer will ask your machine to support.
    • The honest answer to 'Is your machine Good Manufacturing Practice certified?' and why it wins trust.
  3. 3Meet CE marking rules and Machinery Directive 2006/42/EC before shipping

    • How to map your line to the essential health and safety requirements in Annex I of the directive.
    • The order of steps before you fix the CE mark, so nobody stamps a machine that has no file behind it.
    • When a module is partly completed machinery and needs a Declaration of Incorporation, not a CE mark.
  4. 4Write the technical file and Declaration of Conformity inspectors accept

    • What goes into the technical file under Annex VII so an inspector finds each answer in one place.
    • How to word the Declaration of Conformity with every item Annex II of the directive asks for.
    • The harmonised standards to cite for packaging machinery, and the presumption of conformity they give.
  5. 5Clear European customs with the correct registration documents

    • How to get your Economic Operator Registration and Identification number before the first shipment.
    • The commercial invoice, packing list and tariff code your forwarder needs before the crate is closed.
    • Why a clean customs file protects your delivery date and the delay clause in your sales contract.
  6. 6Draft quality agreements that match what European clients expect

    • How to draft a quality agreement that says who approves a change to the machine and who is told.
    • The clauses on audit rights and change notification that European buyers look for in a supplier agreement.
    • What to do when a buyer's template is written for a drug supplier, not a machine builder.
  7. 7Prove data integrity with audit trails and electronic records

    • How to set up audit trails on your machine's control software that match EudraLex Volume 4 Annex 11.
    • What attributable, legible, contemporaneous, original and accurate data looks like on your control screen.
    • When your user roles and passwords satisfy an inspector and when they trigger a finding.
  8. 8Pass validation audits with complete qualification documentation

    • How to sequence Installation Qualification checks so site work follows one order and nothing is redone.
    • How to tie each Operational and Performance Qualification test to the client's acceptance criterion.
    • The Annex 15 records a client auditor asks for at final validation, ready in one binder.
  9. 9Handle incident reports and corrective action with European clients

    • How to set up a service log so a fault at a client site is recorded the day it happens.
    • The steps for reporting a serious malfunction to a client, in the order their quality unit expects.
    • What to do when a defective component forces a client to hold or recall product in several countries.
  10. 10Structure sales contracts around European product liability law

    • How to read European product liability rules so you know what a defective machine exposes you to.
    • Why a liability cap in your sales contract does not bind an injured person under European rules.
    • What to ask your insurer before signing so a claim from a European site is not left uncovered.
  11. 11Pass European client audits with a corrective action plan ready

    • How to arrange your records so the answer to an auditor's question is one binder away, not a search.
    • The questions auditors ask your engineers about change control and calibration, with answers prepared.
    • What a corrective action plan must say to close a finding: cause, fix, owner and date.
  12. 12Close deals by targeting the right European pharmaceutical buyers

    • How to tell who signs, who vetoes and who specifies in a European pharmaceutical company.
    • The follow-up habit that turns a first machine order into the spare parts and service contract.
    • Why speaking to a buyer's regulatory needs wins against a cheaper quote.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

12 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 2 h in the briefing length and 10 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Korea, Packaging and machinery supplier. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 108 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team