PharmaLectures.com

Courses › Country and business playbooks › Selling into Europe as a contract manufacturer (CDMO) from Taiwan

Selling into Europe as a contract manufacturer (CDMO) from Taiwan

Your team answers every European audit question, so quality agreements get signed.

  • 12 audio modulesthree lengths each
  • 2 h to 10 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Taiwan, Contract manufacturer (CDMO / CMO)who it is written for

Why this training matters

Your sales team proposes a new active ingredient project, but nobody has checked it against European Union Good Manufacturing Practice (EU GMP). The client's quality team sends back your draft quality agreement. Talks stop for months, and the market entry you planned slips away.

What changes after this course

Your staff write quality agreements that pass European review the first time. They sit through a remote audit ready to defend the Site Master File. You hold a certificate per learner and a training record that shows an inspector who was trained.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your production floor works to EudraLex Volume 4 without waiting for a consultant. Operators know which rules of Part I or Part II apply to their line, and what Annex 1 expects on sterile work. The quality head signs procedures knowing the text behind each line, so revision rounds stop.

When a European inspector asks for the Site Master File, your regulatory team hands it over and answers the follow-up on the spot. Questions on Annex 11 and computerised systems get a direct reply. The quality unit drafts agreements under Chapter 7 that clients sign without weeks of back-and-forth about who tests and who releases.

Batch files reach the European Qualified Person complete, with the Certificate of Analysis attached, because your team knows what Annex 16 makes that person check. Supervisors log deviations correctly the same day, and change control entries carry enough detail that production keeps its schedule.

Suppliers get qualified and monitored on a schedule you can show. Your team applies for the Certificate of Suitability knowing what the file needs, and reports quality defects under Chapter 8 before the client asks. Sales then answers pre-qualification questions in the meeting, not a week later.

Who needs this training

  • Quality Assurance Manager

    In a pre-qualification meeting, a European Qualified Person asks how your site applies EudraLex Volume 4. You answer from the text, with the chapter and the document that proves it.

  • Regulatory Affairs Specialist

    A client asks for your batch release procedure and the Site Master File on the same afternoon. You find both ready, written to the Annex 16 and inspection requirements, and the launch stays on date.

  • Head of Operations

    An overseas auditor questions a process deviation on a live batch. You show the report, the root cause and the change control entry, and the shipment of active ingredient stays on its route.

  • Business Development Manager

    A prospect asks what your quality management system covers. You answer in plain terms, name the guideline it follows, and the buyer sees a partner instead of a risk.

Roles: Owner, CEO and board, Business development and export sales, Regulatory affairs, Quality assurance and Qualified Person

Businesses: Contract manufacturer (CDMO / CMO)

Countries: Taiwan

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Map each production line to EU GMP Part I or Part II and state the reason in writing.
  2. Assemble a Site Master File and answer an auditor's follow-up questions on it during a remote inspection.
  3. Draft a quality agreement that sets testing, release and change notification duties between your site and a European client.
  4. Check a batch record against the ALCOA principles and flag unsigned or late entries before release.
  5. Compile a batch release file with the Certificate of Analysis for the European Qualified Person under Annex 16.
  6. Write a deviation report and a change control entry that an EU GMP inspector can follow without a call.
  7. Qualify a raw material supplier and keep the monitoring record that proves it stays qualified.

What the company gets

  • Your site faces European inspections with a Site Master File and procedures that match EudraLex Volume 4, so findings on basic documentation fall away.
  • Your quality and legal teams close client agreements in fewer rounds, because the first draft already covers testing, release and change notification.
  • Your batches go to the Qualified Person with complete files, so release is not held for a missing Certificate of Analysis.
  • Your sales team answers compliance questions in the meeting, and your training record shows an inspector exactly who was trained and when.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 12 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing2 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard5 h25 min a module, for regulatory, quality and business-development staff
Expanded10 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Owner, CEO and boardBriefing2 h
Business development and export salesBriefing2 h
Regulatory affairsStandard5 h
Quality assurance and Qualified PersonStandard5 h

Course outline: 12 modules

12 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Target the European market segments that need your Taiwan site

    • Why a buyer's pre-qualification questionnaire rejects a Taiwanese site before anyone visits it.
    • How to pick the European segments your lines, scale and dosage forms actually fit.
    • What to say in the first call so a European buyer sees a site that already speaks its rules.
  2. 2Apply EU GMP Part I or Part II to each of your production lines

    • How to tell which lines fall under EU GMP Part I and which fall under Part II before a client asks.
    • The floor routines that change once EU GMP Chapter 5 on production applies to your batch.
    • What to do when a local Taiwanese standard and the EU text disagree on the same step.
  3. 3Structure your quality system to satisfy ICH Q10

    • How the International Council for Harmonisation Q10 guideline ties your manuals into one system.
    • The management review record that shows an inspector your quality unit steers the site.
    • Why a gap between your procedures and your practice is the first thing found, and how to close it.
  4. 4Defend your Site Master File in a European regulatory audit

    • How to arrange the Site Master File so the answer to a remote auditor's question is two clicks away.
    • The sections an inspector reads first, and the sentence that satisfies each one.
    • What to say when an auditor challenges your internal review process.
  5. 5Draft quality agreements that hold up under Chapter 7 review

    • The split of testing and release duties that stops disputes before the first batch ships.
    • How to write the change notification clause so a client's change never reaches you as a rejected batch.
    • Which clauses a European client's quality team reads first, so approval takes one round, not a string of redlines.
  6. 6Enforce ALCOA principles so your records pass data integrity checks

    • How Attributable, Legible, Contemporaneous, Original and Accurate look on a real batch record.
    • The blank signature and the late entry that turn a good batch record into a data integrity finding.
    • Why an electronic system without a reviewed audit trail draws questions under Annex 11.
  7. 7Prepare batch release files the European Qualified Person can sign

    • The batch file contents Annex 16 makes the Qualified Person check, and how to present each one.
    • Why a missing Certificate of Analysis holds the whole shipment, and how to attach it every time.
    • How to stop the Friday evening call from the Qualified Person asking for one more document.
  8. 8Document deviations so they do not become EU GMP non-compliance

    • How to write a deviation report that shows control, so a European reader sees facts, not panic.
    • The change control entry for a raw material that an EU GMP inspector will accept without questions.
    • What to do when a deviation touches a batch already shipped.
  9. 9Qualify raw material suppliers to the European standard

    • How to qualify a supplier on paper and by audit so the file answers the inspector for you.
    • The monitoring records that prove a raw material vendor is still qualified a year later.
    • Why one unqualified supplier puts the batch at risk, and how to spot the gap before the client does.
  10. 10Secure Certificates of Suitability for your active ingredients

    • How to line up your active ingredient process with EU GMP Part II before you apply.
    • The steps to a Certificate of Suitability application, in the order the file needs them.
    • What the certificate covers, and why the EDQM, the European Directorate for the Quality of Medicines & HealthCare, issues it.
  11. 11Report quality defects to European clients before they ask

    • When to tell a European client about a quality defect, and what the first message must contain.
    • How to run a Chapter 8 complaint file so a defect is closed before it becomes a recall.
    • The notification template that gets your name remembered as the supplier who called first.
  12. 12Keep European contracts active through continuous improvement

    • How to read a change in European rules and update your procedures before the next audit.
    • The improvement records that a European buyer reads as proof you are worth renewing.
    • What additional work European clients hand to the site that proved reliable on the first contract.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

12 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 2 h in the briefing length and 10 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Taiwan, Contract manufacturer (CDMO / CMO). Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 108 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team