PharmaLectures.com

Courses › Country and business playbooks › Selling into Europe as a contract manufacturer (CDMO) from Japan

Selling into Europe as a contract manufacturer (CDMO) from Japan

Your batches get released in Europe because your team answers inspectors plainly.

  • 12 audio modulesthree lengths each
  • 2 h to 10 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Japan, Contract manufacturer (CDMO / CMO)who it is written for

Why this training matters

A European inspector reads your batch file and finds the quality system follows the Japanese ordinance, not EudraLex Volume 4. The Qualified Person will not sign. The client's first batch waits in quarantine, the launch date moves, and the next tender goes to a competitor.

What changes after this course

Your team spots where Japanese practice and European rules differ, and fixes it before a client does. Each module ends with a recorded questionnaire. You hold a certificate for each learner and the training record to show clients and inspectors.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your quality team reads EudraLex Volume 4 beside the Japanese ordinance and knows which procedures stay and which change. They check the Pharmaceutical Quality System against Chapter 1 and International Council for Harmonisation Q10, and they close the gap before an inspector from a national competent authority arrives.

Batch files leave your site right the first time. Chapter 4 and Annex 11 shape each record, and the Qualified Person finds what Annex 16 asks for before signing. The Friday evening calls stop, and the client's release date holds.

Contract and regulatory staff write quality agreements under Chapter 7 that name who does what. A process change goes to the client with the paperwork that Commission Regulation 1234/2008 on variations requires, so no batch is made on a change nobody approved.

Business developers walk into a first meeting with straight answers on Good Distribution Practice, the Falsified Medicines Directive 2011/62/EU and your inspection readiness. At the table they protect your intellectual property, and afterwards they keep clients with plain updates when something slips.

Who needs this training

  • Quality Assurance Manager

    A national competent authority announces a pre-approval inspection, and you must show a Pharmaceutical Quality System that matches Chapter 1 and International Council for Harmonisation Q10, not a translated Japanese manual.

  • Regulatory Affairs Specialist

    A client's regulatory team asks whether your process change needs a variation before the next batch. You answer with the right category and the change control record they need to file.

  • Business Development Lead, Europe

    You sit across from a European buyer who asks for your quality agreement draft and inspection history. You answer plainly and keep ownership of your process knowledge in the contract.

  • Head of Operations

    A client asks who ships the product and who holds the Good Distribution Practice duty. You settle it in the quality agreement before the first pallet leaves the site.

Roles: Owner, CEO and board, Business development and export sales, Regulatory affairs, Quality assurance and Qualified Person

Businesses: Contract manufacturer (CDMO / CMO)

Countries: Japan

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Compare a Japanese procedure with EudraLex Volume 4 Part I and mark each point where the two differ.
  2. Assess your Pharmaceutical Quality System against Chapter 1 and International Council for Harmonisation Q10 and list the gaps.
  3. Assemble a batch file that gives a Qualified Person the information Annex 16 asks for before release.
  4. Draft a Chapter 7 quality agreement that names who releases, who investigates deviations and who approves subcontractors.
  5. Classify a manufacturing change as a variation type and prepare the change control record that supports the filing.
  6. Set up electronic batch records that meet Chapter 4 and Annex 11 expectations for corrections and audit trails.
  7. Negotiate a European manufacturing contract clause that keeps ownership of your process improvements with your site.

What the company gets

  • Your site goes into a pre-approval inspection with staff who answer in plain terms and a quality system that matches Chapter 1.
  • Batch files reach the Qualified Person complete, so release is not held by questions your own records could have answered.
  • Quality agreements and contracts name each party's duties, which gives your client and your inspectors a straight answer about who is responsible.
  • Every learner holds a certificate, and you hold a training record per person to show a European client or inspector.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 12 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing2 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard5 h25 min a module, for regulatory, quality and business-development staff
Expanded10 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Owner, CEO and boardBriefing2 h
Business development and export salesBriefing2 h
Regulatory affairsStandard5 h
Quality assurance and Qualified PersonStandard5 h

Course outline: 12 modules

12 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Map the EU authorisation route that opens your client's market

    • How to tell, before the first call, which authorisation route your client's product follows.
    • The dossier entry that names your site, and why an assessor checks it against what you really do.
    • What to do when a client's launch date depends on a route your site was never told about.
  2. 2Apply European Union Good Manufacturing Practice to your Japanese site

    • How to read EudraLex Volume 4 Part I beside your Japanese ordinance and mark where they differ.
    • The procedure you can keep as it is, and the one an inspector expects you to rewrite.
    • What to do when a Japanese practice and a European rule point in opposite directions.
  3. 3Align your quality system with International Council for Harmonisation Q10

    • How to spot a gap in your Pharmaceutical Quality System before an inspector writes it down.
    • The management review record that shows an inspector your quality system is run, not just filed.
    • Why a Corrective and Preventive Action system that only closes tickets worries European clients.
  4. 4Pass European pre-approval inspections without major non-conformities

    • How to brief your floor staff so a plain answer to an inspector's question stays plain.
    • The data integrity slips that turn a minor observation into a major non-conformity.
    • What to do when an inspector asks for a record that nobody in the room can find.
  5. 5Meet Annex 16 so a Qualified Person can release your batch

    • The data a Qualified Person asks for before signing, ready in your batch file the first time.
    • How Annex 16 treats a batch made outside Europe, and what that means for your release paperwork.
    • Why a missing deviation record holds a release while the client waits.
  6. 6Apply Good Distribution Practice and Falsified Medicines Directive rules

    • When Good Distribution Practice reaches your site and when it stays with your client.
    • The parts of Directive 2011/62/EU that apply to a contract manufacturer, and the parts that do not.
    • What to do when your shipping partner fails a client's distribution audit.
  7. 7Draft Chapter 7 written contracts that protect your site

    • The clauses that settle, in writing, who releases, who investigates and who tells the authority.
    • How to write the quality agreement so a deviation on Friday evening already has a named owner.
    • Why a subcontractor you add without telling the contract giver breaks Chapter 7.
  8. 8Support Marketing Authorisation variations without a rejected batch

    • How to tell a change that needs prior approval from one you only notify afterwards.
    • The change control record that gives your client's regulatory team what the filing needs.
    • What to do when a process change is ready on your side but not yet approved on theirs.
  9. 9Structure batch records to meet Chapter 4 and Annex 11

    • How to set up an electronic batch record that Annex 11 treats as trustworthy.
    • The Chapter 4 rule on who may correct an entry, and how a correction should look on the page.
    • Why a record that was clear to your Japanese reviewer can still fail a European data integrity check.
  10. 10Pitch your contract manufacturing services without friction

    • How to choose which European companies are worth your first call.
    • The opening minute of a first meeting that shows your site already speaks European quality.
    • When to bring up your inspection history and when to wait for the buyer to ask.
  11. 11Negotiate European contracts that keep your intellectual property yours

    • Why the contract clause on process knowledge matters more than the price per batch.
    • How to make European payment terms and your cash cycle agree before you sign.
    • What to do when the client's draft claims the process improvements your team invents.
  12. 12Deliver the consistent quality that wins repeat European orders

    • How to raise a problem with your client before their quality team finds it.
    • The short status note that keeps a client calm while a batch is late.
    • What to say when a deadline slips so the client plans around it, not away from you.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

12 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 2 h in the briefing length and 10 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Japan, Contract manufacturer (CDMO / CMO). Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 108 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team