PharmaLectures.com

Courses › Pharma training by role › Quality control and laboratory: working with European counterparts, minus the friction

Quality control and laboratory: working with European counterparts, minus the friction

Your European partners accept your lab data first time, and your batches stop waiting.

  • 6 audio modulesthree lengths each
  • 1 h to 5 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Quality control and laboratorywho it is written for

Why this training matters

Your European Qualified Person asks for the root cause behind an Out-of-Specification result, and the investigation file does not show it. The analyst repeats the work, the batch stays on hold, and your supply partner waits for an answer you could have sent on day one.

What changes after this course

Your analysts write records and investigations that European partners accept without a query. Your supervisors agree on Out-of-Specification decisions before the retest, not after. You hold a certificate for each learner and a training record for every person, ready for your next audit.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Chapter 6 of the EU Good Manufacturing Practice guide stops being a document in the quality manual and becomes the way your analysts run an ordinary Tuesday. Sampling, testing, retained samples and records follow one logic, so every step has an answer in the file when someone asks why it was done that way.

Records leave your laboratory right the first time. Your analysts follow Chapter 4 documentation rules and the data integrity principles behind Annex 11 for computerised systems, so your European counterpart finds the trace in the record without sending an email to ask for it.

An Out-of-Specification result no longer starts an argument. Your supervisors know what the laboratory phase must show before anyone retests, and what your European quality assurance partner needs to close the deviation. Decisions get made in the meeting, not carried over to the next one.

Outsourced testing stops generating disputes. Your quality assurance staff write Quality Technical Agreements under Chapter 7 that say who holds the raw data, who approves a method change and who answers the inspector. When an inspector asks, your analysts answer from the record, not from memory.

Who needs this training

  • Quality Control Manager

    Sits in the meeting where the Qualified Person asks why the Out-of-Specification file lacks a root cause, and needs the team to produce files that already answer it.

  • Laboratory Supervisor

    Reviews raw data and reports before they leave the lab, and wants analysts to catch the missing trace before a European counterpart does.

  • Quality Assurance Specialist

    Drafts or reviews the Quality Technical Agreement with a contract laboratory and needs the data ownership and method change clauses written before a disagreement, not after.

  • Quality Control Analyst

    Stands at the bench when a European inspector points at one result and asks how it was generated, and needs the record and the answer at hand.

Roles: Quality control and laboratory

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Trace a laboratory procedure to the part of EU Good Manufacturing Practice Chapter 6 that requires it.
  2. Write a raw data entry and a correction that meet Chapter 4 documentation rules and need no follow-up query.
  3. Run the laboratory phase of an Out-of-Specification investigation and record why a retest is or is not justified.
  4. Draft Quality Technical Agreement clauses that assign raw data ownership and method change approval between Contract Giver and Contract Acceptor.
  5. Answer an inspector's question about a single test result by producing the record that supports it.
  6. Reply to a European colleague's data request in writing so that the same test is not run twice.

What the company gets

  • Your laboratory work follows EU Good Manufacturing Practice Chapter 6 in the same way on every shift, so inspectors find one consistent practice.
  • Out-of-Specification files reach your Qualified Person complete, so batches wait less for answers you already hold.
  • Inspectors get a direct answer and the supporting record from the person who ran the test.
  • Disagreements with contract laboratories over data lose their starting point, because the Quality Technical Agreement already settles them.
  • Every learner finishes with a certificate, and you hold a training record per person to show an auditor.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 6 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard2 h 30 min25 min a module, for regulatory, quality and business-development staff
Expanded5 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality control and laboratoryStandard2 h 30 min

Course outline: 6 modules

6 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Apply EU Good Manufacturing Practice Chapter 6 to your daily bench work

    • How to show an inspector that each test in your lab traces back to a Chapter 6 requirement.
    • Why a sample you cannot trace from receipt to result becomes the first finding on the list.
    • What to do when your written procedure and the analyst's actual practice no longer match.
  2. 2Write laboratory records your European counterparts accept first time

    • How to write a result entry that your European counterpart reads once and never queries.
    • The one line in a raw data record that saves you a repeat analysis when someone checks it later.
    • When a correction is acceptable under Chapter 4 documentation rules and when it looks like hiding something.
  3. 3Investigate Out-of-Specification results to satisfy European regulators

    • How to run the first laboratory check so you know whether the lab caused the result before anyone retests.
    • Why retesting before the investigation is finished is the step inspectors read most closely.
    • What to do when the root cause is unclear and your quality assurance partner wants a conclusion.
  4. 4Draft Quality Technical Agreements that settle test data disputes early

    • The clause that tells your contract laboratory who owns the raw data and where it must be kept.
    • How to split Contract Giver and Contract Acceptor duties under Chapter 7 so nothing falls between you.
    • What to write about who approves a method change so a test result is never disputed afterwards.
  5. 5Answer European inspector questions on laboratory controls on the spot

    • Where inspectors start when they walk into a laboratory, and how to be ready at that spot.
    • How to answer a question about one test result with the record in hand, not from memory.
    • When to answer straight away and when to fetch the record, so you never guess in front of an inspector.
  6. 6Fix daily delays with your European quality control partners

    • How to ask a clarifying question about a method without it sounding like a complaint.
    • What to say when a European colleague asks for results in a format your system does not produce.
    • The habit of confirming each request in writing that stops the same test being run twice.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

6 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h in the briefing length and 5 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Quality control and laboratory. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 54 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team