PharmaLectures.com

Courses › Pharma training by role › Quality control and laboratory: the ten documents and systems you will live in

Quality control and laboratory: the ten documents and systems you will live in

Your analysts answer the inspector at the bench, and nobody has to call you.

  • 5 audio modulesthree lengths each
  • 50 min to 4 h 10 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Quality control and laboratorywho it is written for

Why this training matters

An inspector asks for the calibration record of a critical instrument. The analyst opens one binder, then a second, then a third, while the inspector waits. The finding that follows holds batch release and pulls your team into a remediation plan.

What changes after this course

Your analysts find the record, explain the data integrity rule behind it and carry on. You hold a certificate for each learner and a per-person training record, so the inspector sees the proof before reaching the lab door.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your analysts stop second-guessing the notebook. They correct entries so the original stays readable, review audit trails before a supervisor asks, and treat electronic records the way Annex 11 of European Union Good Manufacturing Practice and Title 21 of the Code of Federal Regulations, Part 11 expect. Errors get caught at the bench, not in the inspection room.

A chemist opens a European Pharmacopoeia or United States Pharmacopeia monograph and sees how it meets your specification. A method change is sorted into small adjustment or revalidation on the spot. Before a sample goes on an instrument, the analyst checks the Installation Qualification, the Operational Qualification and the calibration label.

Supervisors close an out-of-specification result in the time the batch can afford. They follow the Food and Drug Administration guidance on out-of-specification results, name a root cause that holds up, and stop writing human error as the answer. Deviations reach quality assurance with the facts already attached.

When a new method means a change in the Laboratory Information Management System, your team raises the change control and nobody waits on a missing signature. Training coordinators produce a record for each person that answers Chapter 2 of European Union Good Manufacturing Practice, so the personnel question ends in one document.

Who needs this training

  • Quality Control Analyst

    A result lands outside the limit at four in the afternoon. The analyst records it, stops and reports it at once, so the retest question never turns into a data integrity question.

  • Laboratory Manager

    An inspector asks for the Installation Qualification and Operational Qualification file of a new liquid chromatograph. The manager hands it over complete, signed and in order.

  • Quality Assurance Reviewer

    They review electronic data and audit trails in the Laboratory Information Management System, and need a clear view of what Annex 11 and Title 21 Code of Federal Regulations Part 11 require them to check.

  • Training Coordinator

    The audit date is set, and the coordinator must show for each analyst what was trained, when, and on which procedure version. The per-person record answers it.

Roles: Quality control and laboratory

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Correct a laboratory notebook entry so the original value stays readable and the reason is recorded.
  2. Review an audit trail in a laboratory system against Annex 11 and name what must be queried.
  3. Decide whether a test method change is a minor adjustment or needs revalidation.
  4. Check an Installation Qualification and Operational Qualification file for missing signatures before an instrument is released for testing.
  5. Open an out-of-specification investigation and write a root cause that does not stop at human error.
  6. Raise a change control for a Laboratory Information Management System update and assemble a per-person training record that meets Chapter 2.

What the company gets

  • Your laboratory meets the inspector with data integrity practice already in place at the bench, not a promise to fix it later.
  • The qualification and calibration files for your instruments are complete before anyone asks to see them.
  • Out-of-specification investigations close with a root cause that holds, so batches wait less for release.
  • Each analyst has a certificate and a training record, so the personnel question in an audit has a ready answer.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 5 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing50 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard2 h 05 min25 min a module, for regulatory, quality and business-development staff
Expanded4 h 10 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality control and laboratoryStandard2 h 05 min

Course outline: 5 modules

5 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Apply Good Manufacturing Practice rules so your lab data holds up

    • Why an audit trail that nobody reviews becomes the first finding the inspector writes.
    • How to correct a notebook entry so the original value stays readable and the reason is on record.
    • The Annex 11 habits that make an electronic result as defensible as a signed paper page.
  2. 2Read specifications and keep validated test methods error-free

    • What to do when a specification and the pharmacopoeia monograph disagree on the same limit.
    • How to tell a small method adjustment from a change that sends you back to revalidation.
    • When a method transfer is complete and when the receiving lab still owes a comparison.
  3. 3Keep lab equipment qualified and calibrated so no result is rejected

    • Why one missing qualification signature puts every result from that instrument in doubt.
    • How to read a calibration certificate and spot an out-of-tolerance point before it costs you results.
    • The calibration label check that stops a sample from ever running on an overdue instrument.
  4. 4Investigate deviations and close out-of-specification results on time

    • How to run the first-stage laboratory check so a retest never looks like testing into compliance.
    • Why human error alone fails as a root cause, and what the inspector accepts instead.
    • What to do when a result fails at four in the afternoon and the batch is waiting for release.
  5. 5Run change control and keep every training record current

    • How to route a new test method through change control without stopping the work on the bench.
    • The access-rights review that keeps your Laboratory Information Management System inside Annex 11.
    • Why a training record kept per person answers the Chapter 2 question before the inspector asks.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

5 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 50 min in the briefing length and 4 h 10 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Quality control and laboratory. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 45 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team