PharmaLectures.com

Courses › Pharma training by role › Quality control and laboratory: your first month in pharma, starting from zero

Quality control and laboratory: your first month in pharma, starting from zero

New lab analysts write records right the first time, so your batches release on time.

  • 8 audio modulesthree lengths each
  • 1 h 20 min to 6 h 40 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Quality control and laboratorywho it is written for

Why this training matters

A new analyst signs a lab notebook page and leaves the date blank. Quality assurance opens a deviation, and the batch waits in quarantine while someone traces the missing entry. Your senior analyst spends days on that paperwork instead of testing the next product.

What changes after this course

Your new analysts fill in notebooks and batch records correctly the first time. They stop at an out-of-specification result instead of retesting alone. You hold a certificate for each learner and a training record for each person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your analyst reads EudraLex Volume 4, Part I, Chapter 6 and sees the sampling and testing steps at their own bench. A sample arrives, and they know which procedure governs it and when a material release question belongs with the supervisor. Untested components stay off the manufacturing line.

The notebook page and the Certificate of Analysis are right the first time. Chapter 4 on documentation and Annex 11 on computerised systems set the standard, and your analysts meet it: every entry attributable, legible, contemporaneous, original and accurate. Quality assurance stops sending pages back for a missing date.

An instrument flashes a result outside specification. The technician stops, tells the supervisor and opens the laboratory investigation under the site procedure. There is no retest on the side and no quiet fix. Before testing, they also check calibration and qualification status, so a busy production period does not end on a failed instrument.

When an inspector from the Food and Drug Administration or a national authority asks for the logbook, your analyst hands over a clean one and answers the question asked. Gaps under Title 21 Code of Federal Regulations Part 11 get found and closed by your own team before anyone from outside walks in.

Who needs this training

  • Junior Quality Control Analyst

    A test fails and the deviation form sits blank in front of them. They know what to write first, who to tell, and why they do not retest alone.

  • New Laboratory Technician

    A critical sample is ready and the instrument file is open. They know what the Installation, Operational and Performance Qualification records must show before the first run.

  • Quality Control Team Leader

    Friday afternoon used to go on missing dates and unsigned lines in notebooks. Now pages arrive clean, and the time goes to reviewing data for batch release.

  • Quality Assurance Associate

    A laboratory investigation lands on the desk. They can check whether the analyst followed the procedure before the first result was invalidated, and ask the right questions at once.

Roles: Quality control and laboratory

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Match a rule in EudraLex Volume 4, Part I, Chapter 6 to the sampling or testing task in front of you.
  2. Complete a laboratory notebook page and a Certificate of Analysis with every entry attributable, legible, contemporaneous, original and accurate.
  3. Stop work, notify the supervisor and start the record of an out-of-specification result within the first minutes.
  4. Sign an electronic record under Title 21 Code of Federal Regulations Part 11 using only your own login.
  5. Check an instrument's calibration and qualification status before the first sample is analyzed.
  6. Answer an auditor's question about your laboratory records in one short, factual statement.

What the company gets

  • Missing signatures and undated entries stop reaching quality assurance, so fewer data integrity findings are waiting for the next inspection.
  • Laboratory documentation lines up with EudraLex Volume 4 before the next audit date is announced.
  • Inspectors get straight, factual answers about quality events and deviation investigations from the people who ran the tests.
  • New laboratory staff reach the bench with a certificate each, and you hold a training record for every person.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 8 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 20 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard3 h 20 min25 min a module, for regulatory, quality and business-development staff
Expanded6 h 40 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality control and laboratoryStandard3 h 20 min

Course outline: 8 modules

8 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Make daily testing decisions that keep unsafe product from patients

    • Why the result you report is a key check before a batch reaches a patient.
    • How to spot the moment a result needs your supervisor before anyone signs for release.
    • What a shortcut on one test does to the batch, the investigation and your own name.
  2. 2Apply Good Manufacturing Practice rules to each task at your bench

    • How to read a Good Manufacturing Practice rule and see which bench task it governs.
    • The gowning and hygiene step that keeps a sample from failing for the wrong reason.
    • What to do when a Standard Operating Procedure is unclear and a sample is waiting.
  3. 3Write lab records that meet ALCOA+ and pass review without edits

    • How to fill in a notebook page so quality assurance has nothing to send back.
    • Why a single undated entry costs a deviation, and the habit that prevents it.
    • The pre-signature check, from attributable to accurate, that you run on every entry.
  4. 4Run analytical methods on raw materials and finished goods correctly

    • Why a reference standard decides whether your raw material result can be trusted.
    • How to confirm a method is validated for your product before the first sample goes in.
    • The reagent and solution labels you check twice, because a wrong one ruins a good run.
  5. 5Stop, report and document an out-of-specification result at once

    • What to do in the first minute after your instrument shows a result outside specification.
    • How to write the deviation entry so an investigator reaches the cause without a second interview.
    • When a fix needs a change control request and when it stays inside the existing procedure.
  6. 6Secure Electronic Records Under Title 21 Code of Federal Regulations Part 11

    • Why Part 11 says your electronic signature carries the same weight as your handwritten one.
    • How Annex 11 and Part 11 limit who can change a result and what the audit trail must show.
    • The shared-login habit that turns a good result into a data integrity finding.
  7. 7Check calibration status before you test and schedule the next one

    • How to tell whether an instrument needs calibration, qualification or preventive maintenance.
    • What to check on the instrument status label before you run the first sample of the day.
    • The Installation, Operational and Performance Qualification records that say a new instrument is ready.
  8. 8Answer inspectors during audits with short, factual replies

    • What the inspector asks first at the laboratory door, and who should answer.
    • The documents an auditor asks for to test your procedures, ready on the shelf before they ask.
    • How to give one short, factual answer and stop, so the line of questioning ends there.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

8 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 20 min in the briefing length and 6 h 40 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Quality control and laboratory. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 72 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team