PharmaLectures.com

Courses › Pharma training by role › Quality assurance and Qualified Person: working with European counterparts, minus the friction

Quality assurance and Qualified Person: working with European counterparts, minus the friction

Ship batches to Europe on time and meet inspectors with files that hold up.

  • 6 audio modulesthree lengths each
  • 1 h to 5 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Quality assurance and Qualified Personwho it is written for

Why this training matters

A European inspector questions your data integrity records during a routine audit, and your team answers a question they misread. The batch stays on hold. Weeks go to drafting corrective actions while the next release waits behind it.

What changes after this course

Your team reads European expectations correctly and builds batch files that answer the questions before they are asked. Inspectors get straight answers. You hold a certificate for each learner and a training record for each person, ready to show.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your quality team stops guessing what a European inspector or national competent authority expects. They open EudraLex Volume 4, find the part that applies and read it the way the inspectorate does. Documents come out aligned with Good Manufacturing Practice on the first draft, and the third round of revisions stops happening.

Batch release stops depending on a Friday evening call. Your files already answer what the Qualified Person must check under Annex 16, and your sterile teams apply Annex 1 without waiting for an outside consultant. The Batch Manufacturing Record reaches the reviewer with each question answered before it is asked.

When an out-of-specification result lands, the laboratory follows Chapter 6 of Part I and does not improvise. Suspected quality defects reach the right person quickly, and when a recall is needed the authority is notified as Good Distribution Practice Chapter 6 requires. Minor deviations stay minor because the investigation already meets European expectations.

On inspection day, your people know what the inspector asks for first and answer with the record in hand. With contract manufacturers and colleagues in other countries, agreements are written in words both sides read the same way. The email thread that used to drag on ends in one clear reply.

Who needs this training

  • Quality Assurance Manager

    The inspection notice arrives and the team scrambles for documents. After this course they know which Annex each document answers, so you spend the week checking files instead of hunting for them.

  • Qualified Person

    You hesitate before certifying a batch for the European market. The course lines your checks up with EudraLex Volume 4 and Annex 16, so you sign knowing the file answers what you would ask.

  • Regulatory Affairs Specialist

    Colleagues keep asking what a European Qualified Person is responsible for. Point them to the module that answers it, and stop re-explaining the same duties in every project meeting.

  • Head of Quality Control

    An out-of-specification result involves a European partner and the two sides use different words. You align the investigation with Chapter 6 so the report holds up when the partner or inspector reads it.

Roles: Quality assurance and Qualified Person

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Apply Annex 1 to the daily routine of a sterile manufacturing line and show which procedure each rule maps to.
  2. Lay out a Batch Manufacturing Record that answers the checks a Qualified Person makes under Annex 16.
  3. Draft a reply to a European inspection finding that cites the right section and proposes a corrective action.
  4. Judge whether a change triggers Annex 15 qualification or validation work and record the reason.
  5. Route a suspected quality defect to the responsible person and the competent authority using the correct chapter.
  6. Write a meeting follow-up with a contract manufacturer that records each agreement in terms both sides can verify.
  7. Check your own procedures against the points a European inspectorate raises first and list the gaps.

What the company gets

  • The risk of a critical finding on data integrity or deviations falls, because staff know what the inspector reads first.
  • Inspector questions about European Good Manufacturing Practice get a straight answer from the person who owns the record.
  • Batch release decisions under Annex 16 move faster because the Qualified Person finds the file complete.
  • You hold a certificate for each learner, a recorded multiple-choice result for each module and a training record per person.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 6 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard2 h 30 min25 min a module, for regulatory, quality and business-development staff
Expanded5 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard2 h 30 min

Course outline: 6 modules

6 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Place your product in the European regulatory system and know who decides

    • How to tell which European authority owns your question, so you ask the right one first.
    • What Part I of EudraLex Volume 4 expects on the shop floor, so your procedures match it.
    • Why your market entry plan depends on the authorisation route that covers each country you ship to.
  2. 2Back the European Qualified Person with the evidence their duties require

    • The checks a Qualified Person makes before certifying, so your file answers them before the call comes.
    • How to lay out the Batch Manufacturing Record so the reviewer finds each answer on the first read.
    • What to do when Annex 16 asks for something your file lacks and the shipment date is close.
  3. 3Apply Annex 1 and Annex 15 in daily quality operations

    • How Annex 1 sets what operators do at the sterile line, so your procedures match their practice.
    • When a change triggers Annex 15 qualification or validation work, and when it does not.
    • The Good Distribution Practice checks that keep a shipment's records intact across a border.
  4. 4Prepare for a European inspection and manage it to the closing meeting

    • What a European inspector asks for first, so the right documents are on the table at the opening meeting.
    • Why an open deviation list draws findings, and how to close the weak points before the inspector reads it.
    • How to answer a data question in plain words so the inspector reads your data as you meant it.
  5. 5Handle quality incidents the way European inspectors expect

    • How to work an out-of-specification result under Chapter 6 so no retest looks like testing into compliance.
    • Who must hear about a quality defect, and how fast the report reaches them.
    • What to do when a defect forces a recall and Good Distribution Practice Chapter 6 says tell the authority.
  6. 6Work with European colleagues so agreements are clear and decisions stick

    • How to set a contact routine with a contract manufacturer so small questions do not hold a batch.
    • Why the same email reads differently in two countries, and how to word yours so the decision is clear.
    • The wording that turns a phone agreement into a record both sides can point to later.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

6 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h in the briefing length and 5 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Quality assurance and Qualified Person. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 54 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team