PharmaLectures.com

Courses › Pharma training by role › Quality assurance and Qualified Person: the ten documents and systems you will live in

Quality assurance and Qualified Person: the ten documents and systems you will live in

Your Qualified Person signs batch files without calling you back for missing pages.

  • 5 audio modulesthree lengths each
  • 50 min to 4 h 10 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Quality assurance and Qualified Personwho it is written for

Why this training matters

An inspector asks for the deviation report on a delayed batch. Your team finds the file, but the root cause is thin and nobody can show why the batch was fit for release. The inspector writes it up, the batch stays on hold, and the Qualified Person waits with it.

What changes after this course

Your team hands over batch files that already answer what Annex 16 makes the Qualified Person ask. Deviations close with corrective actions an auditor can follow. You hold a certificate for every learner and a training record for each person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your Qualified Person stops sending batch files back. You know what Annex 16 makes them check before certification, so the file arrives complete. Procedures follow Chapter 4 of European Union Good Manufacturing Practice, and your Quality Manual lines up with International Council for Harmonisation Q10. The right document lands on the right desk the first time.

A deviation or Out-of-Specification result no longer starts a scramble. Your team writes the root cause and the reasoning for the next step into the report, as Chapter 1, Chapter 4 and Chapter 6 expect. When the Qualified Person asks why a batch is fit for release, the answer is already on the page.

Facility and equipment records stay in order. Calibration logs, maintenance entries and validation reports follow Chapter 3 and Annex 15 of European Union Good Manufacturing Practice, so nobody uses an instrument past its date. When an inspector asks for a change control or a validation protocol, your staff pulls it from the file without a search.

Audit findings close for good. Each Corrective and Preventive Action has a cause, an owner and a check that it worked, and the Product Quality Review shows which deviations keep returning. Each file also traces back to Directive 2001/83/EC and the pharmaceutical quality system in Chapter 1.

Who needs this training

  • Qualified Person

    You open a batch file the night before certification and find a deviation with no root cause. This course gives your team the standard Annex 16 sets, so the file is complete when it reaches you.

  • Quality Assurance Manager

    Your review queue is full of procedures that miss Chapter 4 and come back for another draft. Your team writes them to the standard the first time, and you sign instead of rewriting.

  • Quality Systems Specialist

    A calibration date slips and nobody notices until the inspector asks. You get a clear way to track calibration, change control and validation protocols under Chapter 3 and Annex 15.

  • New Quality Assurance Team Member

    Your first month hands you a stack of regulations and no order to read them in. You get a clear map of the documents and systems you work with daily, and the rule behind each.

Roles: Quality assurance and Qualified Person

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Trace a daily quality task back through Chapter 1 of European Union Good Manufacturing Practice to Directive 2001/83/EC.
  2. Draft a Chapter 4 procedure that an operator can follow step by step without asking for clarification.
  3. Assemble a batch file that answers the Annex 16 checks before the Qualified Person asks.
  4. Write a deviation report that states the root cause and supports the release decision.
  5. Check calibration dates and validation status against Chapter 3 and Annex 15 before an instrument is used.
  6. Close a Corrective and Preventive Action with evidence that it worked before the next inspection.

What the company gets

  • Batches leave on schedule because the paperwork is complete when the Qualified Person opens it.
  • An inspector who asks for the Site Master File, a deviation or a calibration record gets a straight answer from the person who owns it.
  • The Qualified Person spends the time on certification instead of chasing missing signatures and pages.
  • Out-of-Specification investigations are documented well enough to defend, so a thin record is not what puts a batch at risk.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 5 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing50 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard2 h 05 min25 min a module, for regulatory, quality and business-development staff
Expanded4 h 10 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard2 h 05 min

Course outline: 5 modules

5 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Tie your daily tasks to European Union Directive 2001/83/EC

    • Why the Qualified Person's duties under Article 51 shape the records you prepare.
    • How to trace one daily task up through Good Manufacturing Practice to the Directive behind it.
    • The chain from Directive to guideline to your procedure that settles which rule applies.
  2. 2Write controlled documents and procedures that meet Chapter 4

    • What an inspector looks for in your controlled documents before walking onto the floor.
    • How to write a procedure step so an operator follows it the same way on a night shift.
    • The document control step that pulls outdated instructions off the floor before they reach a batch.
  3. 3Build batch release and deviation files the Qualified Person can sign

    • What the Qualified Person looks for in a batch file before putting a signature on certification.
    • How to write a deviation so the release decision explains itself on the page.
    • What to do when an Out-of-Specification result lands on a batch already waiting for release.
  4. 4Keep facility and equipment records that stand up under Chapter 3

    • Why the validation master plan decides whether each equipment protocol holds up in an inspection.
    • How to keep calibration records so no one tests a batch on an instrument that is out of date.
    • The link between a routine maintenance log entry and the product quality question it answers.
  5. 5Close audit findings with Corrective and Preventive Actions that hold

    • How to arrange your files so an announced inspection finds nothing to hunt for.
    • When a Corrective and Preventive Action is closed and when it only looks closed.
    • Why the Product Quality Review is the quickest way to spot a deviation that keeps coming back.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

5 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 50 min in the briefing length and 4 h 10 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Quality assurance and Qualified Person. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 45 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team