PharmaLectures.com

Courses › Pharma training by role › Production and engineering: the ten documents and systems you will live in

Production and engineering: the ten documents and systems you will live in

Your floor teams write records that hold up in an inspection, first time.

  • 5 audio modulesthree lengths each
  • 50 min to 4 h 10 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Production and engineeringwho it is written for

Why this training matters

An inspector points at a blank signature box on a batch record and asks the operator to explain it. The operator has no answer, and the batch sits on hold while Quality Assurance opens a deviation that one line, written at the right moment, would have prevented.

What changes after this course

Your operators, technicians and engineers fill in logbooks, change requests and qualification files right the first time, and they classify a deviation before it grows. You hold a certificate for each learner and a training record for each person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

The operator signs the step when the step is done. That is what Chapter 4 of European Union Good Manufacturing Practice asks for, and your batch records start to show it. The Qualified Person finds no blank boxes in the batch file, and Quality Assurance stops sending pages back for a missing date or initial.

Technicians write the logbook line and the calibration result while the instrument is still in front of them. When a gauge drifts, the next shift sees it at once. Cleaning and usage entries line up, so an inspector reading the log finds an unbroken story and no reason to doubt the data.

Supervisors report a floor event as a possible minor or major deviation, and they write the report so Quality Assurance can act on it. Change control requests carry the reason and the impact. Corrective and Preventive Action plans follow International Council for Harmonisation Q10, and risk assessments follow Q9, with a root cause behind each one.

Junior engineers meet the auditor's question about a qualification with the protocol and the report in hand. They can say what Installation, Operational and Performance Qualification each prove, and where Annex 15 of European Union Good Manufacturing Practice asks for it. A new line starts on its date because the files hold up on first read.

Who needs this training

  • Production Operator

    Handing over at the end of a shift, they close every box in the batch record, so the next team does not hunt for a signature that only one person can give.

  • Engineering Technician

    After a calibration check they log the result and the instrument status in the same visit, so no auditor has to ask whether last month's run was made on a drifting gauge.

  • Manufacturing Supervisor

    A deviation lands on the desk mid-shift. They know within minutes how to report it, who to call, and what to write before the batch moves on.

  • Junior Validation Engineer

    An inspector asks them to justify the Performance Qualification of a new packaging line. They open the protocol, point to the acceptance criteria and the signed report, and answer.

Roles: Production and engineering

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Sign and date a batch record entry at the time of the action, as Chapter 4 requires.
  2. Review a logbook page and spot the gap that would raise a data integrity question.
  3. Report a floor event as a possible minor or major deviation and name who must be told.
  4. Write a change control request that states the reason, the scope and the impact on the validated state.
  5. Draft a Corrective and Preventive Action plan that names a root cause and a check that proves it worked.
  6. Score a process risk with Failure Mode and Effects Analysis and record the reasoning for the review meeting.
  7. Explain what Installation, Operational and Performance Qualification each prove, and show the document where it is recorded.

What the company gets

  • Batch files reach the Qualified Person with every signature and logbook entry in place, so release does not wait on corrections.
  • Quality Assurance gets deviation reports and change requests it can act on at the first read, and spends less time sending them back.
  • An inspector asking about the Validation Master Plan or a qualification protocol gets a straight answer and the document, from the person who works with it.
  • You hold a certificate for each learner and a training record for each person, ready for the next audit.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 5 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing50 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard2 h 05 min25 min a module, for regulatory, quality and business-development staff
Expanded4 h 10 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Production and engineeringStandard2 h 05 min

Course outline: 5 modules

5 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Update procedures to meet European Union Good Manufacturing Practice Chapter 4

    • Why an entry made at the time of the action protects you better than one tidied up at shift end.
    • How to revise a Standard Operating Procedure so the floor copy and the approved copy never differ.
    • The review step that catches an outdated version before an operator follows it on the line.
  2. 2Write logbook entries and calibration records an inspector can trust

    • What to check in a logbook page so a gap in the record never becomes a data integrity question.
    • How to log a calibration result so the next shift knows at once whether the instrument can be used.
    • The cleaning and usage entries that let you prove, from the log alone, what ran on a machine last.
  3. 3Submit change control requests and classify minor and major deviations

    • When a floor event is a minor deviation, when it is major, and who must hear about it first.
    • How to word a change control request so Quality Assurance sees scope, reason and impact in one read.
    • What to do when a repair quietly changes a validated machine and nobody has raised a change.
  4. 4Draft Corrective and Preventive Action plans and run risk assessments

    • Why naming the root cause closes a Corrective and Preventive Action and the word retrain does not.
    • How to score a risk with Failure Mode and Effects Analysis so the numbers stand up in the meeting.
    • The follow-up check that shows an inspector your action worked, not only that it was done.
  5. 5Defend validation and qualification files in front of an auditor

    • How to explain Installation, Operational and Performance Qualification in plain words to an auditor.
    • What Annex 15 expects the Validation Master Plan to say, so the plan answers before the auditor asks.
    • Why a gap in Installation Qualification data stops a new line, and how to find it before the audit.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

5 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 50 min in the briefing length and 4 h 10 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Production and engineering. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 45 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team