PharmaLectures.com

Courses › Pharma training by role › Production and engineering: your first month in pharma, starting from zero

Production and engineering: your first month in pharma, starting from zero

Your new hires stop sending Quality Assurance work it has to send back.

  • 8 audio modulesthree lengths each
  • 1 h 20 min to 6 h 40 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Production and engineeringwho it is written for

Why this training matters

A new engineer runs a reactor whose calibration lapsed last week. Quality Assurance finds it at batch review, opens an investigation and holds the release. At the next audit the inspector writes it up as a training gap, and your team spends weeks rewriting procedures.

What changes after this course

Your team checks calibration status and critical process parameters before the run, and stops the line when one drifts. They apply Title 21 of the Code of Federal Regulations (21 CFR), Parts 210 and 211, on the floor. You hold a certificate for each learner and a training record to show any auditor.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

When a process parameter drifts on your shift, you know which Food and Drug Administration rule applies and what to write down. Parts 210 and 211 of Title 21 stop being a binder on a shelf. They become the reason you halt the line, call Quality Assurance and log the event before the batch is lost.

Quality Assurance stops sending your deviation reports back. You write a root cause analysis that names the cause, shows the evidence and sets a corrective action, in the shape the International Council for Harmonisation guideline Q10 expects of a pharmaceutical quality system. The report closes on time, and nobody rewrites your text.

Equipment stays online because you catch the calibration lapse on the reactor before the run, not after. You set preventive maintenance dates under the equipment rules of Part 211, and you keep the purified water system ready for the next shift. Downtime becomes something you plan.

Your change control form leaves your desk complete. You describe the change, whether a stirrer speed or an equipment upgrade, assess its effect on product quality and attach what the approver needs. The form is not returned for a missing risk assessment, and nobody changes the setting before the signature.

Who needs this training

  • Junior Production Engineer

    Sees a reactor whose calibration has lapsed, stops the run, logs the event and calls Quality Assurance before the batch is compromised.

  • New Quality Assurance Associate

    Reviews a stack of batch records, finds the critical process parameter nobody filled in and sends the record back before a release is signed.

  • Manufacturing Technician

    Walks into a Class 7 cleanroom gowned in the right order and moves materials through the airlock without setting off a particle count alarm.

  • Process Improvement Coordinator

    Drafts the change control form for a new blender speed with the risk assessment attached, so Quality Assurance can approve it without a return trip.

  • Maintenance Planner

    Books preventive maintenance ahead of the validation date, so the auditor finds the equipment qualified and the schedule on file.

Roles: Production and engineering

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Spot a missing signature or critical process parameter in a batch record before it goes to Quality Assurance.
  2. Gown in the correct order for a Class 7 cleanroom and move through the airlock without carrying particles in.
  3. Stop a reactor when a critical process parameter falls outside the validated range, and log the event.
  4. Write a root cause analysis that Quality Assurance can use to close a manufacturing deviation on time.
  5. Complete a change control form with the risk assessment an approver needs to sign on the first pass.
  6. Sort pharmaceutical waste into the right stream and label it so it holds up in an environmental inspection.
  7. Schedule preventive maintenance so equipment is still qualified on the validation date.

What the company gets

  • New hires stop sending batch records and deviation reports back and forth, so release dates stop slipping on paperwork.
  • Quality Assurance spends its time reviewing and releasing batches instead of rewriting reports that came from the floor.
  • Your technicians give an inspector a straight answer on calibration and maintenance schedules, because they know the record behind it.
  • You hold a certificate for each learner and a training record for each person, ready the day an auditor asks.
  • Each module ends with a recorded multiple-choice questionnaire, so the record shows what each person answered.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 8 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 20 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard3 h 20 min25 min a module, for regulatory, quality and business-development staff
Expanded6 h 40 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Production and engineeringStandard3 h 20 min

Course outline: 8 modules

8 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Apply 21 CFR Parts 210 and 211 to the tasks on your shift

    • Why the quality unit sends back a record with one missing signature, and how to stop it.
    • What Part 210 and Part 211 each ask of you, so you know which rule an inspector is quoting.
    • The equipment log entry that proves to an inspector what ran, when, and who cleaned it.
  2. 2Review a batch record and catch missing critical process parameters

    • How to read a batch record line by line and spot the critical process parameter nobody filled in.
    • What to do when you spot a wrong entry, so the correction survives an audit.
    • When a missing value goes straight to Quality Assurance and when a correction on the record is enough.
  3. 3Gown for a Class 7 cleanroom and stop cross-contamination

    • Why a Class 8 gowning routine fails in International Organization for Standardization Class 7.
    • How to enter, move and exit so you do not carry particles from the corridor to the product.
    • The airlock habit that stops a pallet of materials from bringing contamination into the suite.
  4. 4Run reactors and purified water systems without causing downtime

    • What to check on the reactor before the shift starts, so a calibration lapse stops the run early.
    • Why a small drift in purified water readings is a call to make now, not at the end of shift.
    • The early reading that tells you a pump needs attention before it stops the batch.
  5. 5Schedule preventive maintenance before equipment validation fails

    • How to build a preventive maintenance schedule that keeps equipment in its validated state.
    • When to raise corrective maintenance and when calibrating the sensor is all you need.
    • The record that shows an inspector your equipment was maintained and qualified for the process it runs.
  6. 6Write a root cause analysis that closes a deviation report on time

    • What to do when a temperature probe reads below the validated range in the middle of a run.
    • How to build a root cause analysis that Quality Assurance can close without a second round of questions.
    • The wording that separates a vague cause from one that lets a deviation report close on time.
  7. 7Submit a change control form that Quality Assurance approves today

    • Why changing a stirrer speed needs a signed change control form before anyone touches the dial.
    • How to size up the risk of a change to a validated process in terms Quality Assurance accepts.
    • The details an approver looks for on an equipment change, so the form is not returned to you.
  8. 8Segregate pharmaceutical waste so you pass environmental inspections

    • Which bin each waste stream belongs in, so an environmental inspector finds nothing mixed.
    • The label and log entry an inspector expects on a waste container at the door.
    • What to do when you find waste in the wrong stream, before it leaves the building.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

8 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 20 min in the briefing length and 6 h 40 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Production and engineering. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 72 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team