PharmaLectures.com

Courses › Pharma training by line of business › Week one at the contract manufacturer (CDMO): the company, the industry and Europe

Week one at the contract manufacturer (CDMO): the company, the industry and Europe

Your new hires work to Good Manufacturing Practice before a client auditor meets them.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Contract manufacturer (CDMO / CMO)who it is written for

Why this training matters

A new project manager reads a client's quality requirement the wrong way, and a batch deviation follows. The client stops trusting your reports, the delivery slips by weeks and the penalty clause is quoted back to you. The next bid round starts with that story.

What changes after this course

Your team uses the same words as your clients and their auditors from the first week. Operators know how each task keeps contamination out, and project managers know what a client means by a quality requirement. You hold a certificate per learner and a training record for each person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your new operators walk onto the floor knowing where their task sits in the supply chain. They gown and clean to EudraLex Volume 4, spot a cross-contamination risk during a material transfer and report it before the batch is touched.

Project managers stop guessing what a client means. They track a project from the signed contract through technology transfer to process validation, catch a scope change hidden in a small request, and back process changes with an International Council for Harmonisation Q9 risk assessment.

A deviation report reaches Quality Assurance right the first time. Floor staff describe the root cause in the terms your Quality Management System asks for, work to Good Manufacturing Practice and Directive 2001/83/EC, and corrective actions reach closure without a rewrite.

When a national competent authority or a client auditor arrives, your people answer from the record. Batch entries are signed and dated under data integrity rules, the Qualified Person has what Annex 16 requires, and nobody guesses at an answer.

Who needs this training

  • Junior Project Manager

    Promises a delivery date on the kickoff call without allowing for technology transfer, then has to explain to the client why the first process validation batch runs late.

  • Manufacturing Operator

    Has to correct a wrong entry on a batch record and needs to know how to do it so the original stays readable when the next client audit reads it.

  • Business Development Representative

    Sits across from a prospective client who asks how your site handles an out-of-specification result, and answers in the client's own terms instead of passing the question on.

  • Quality Assurance Associate

    Spends the afternoon rewriting deviation reports from the production team because root cause and impact are written in everyday words instead of the terms the quality system needs.

Roles: every role in the company

Businesses: Contract manufacturer (CDMO / CMO)

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Describe your site's manufacturing services and therapeutic areas in terms a client's sourcing lead recognises.
  2. Gown, clean and transfer material in the cleanroom the way EudraLex Volume 4 and your site procedures require.
  3. Write a deviation report that follows your Quality Management System and passes Quality Assurance review the first time.
  4. Brief a client on a delay or a technology transfer step with a plan attached, not just the problem.
  5. Correct and sign a batch record entry under data integrity rules, including a temperature check.
  6. Answer an inspector's or client auditor's direct question with the facts, and find the response deadline that applies.

What the company gets

  • Client audits move faster because batch records arrive complete, dated and signed, with nothing for the auditor to ask you to explain.
  • Your Quality Assurance team spends fewer hours rewriting deviation reports and more hours on batch release.
  • New operators stop the small documentation errors that hold a release and a delivery.
  • Project managers set timelines that allow for technology transfer and validation, so clients get dates your site can keep.
  • Every new hire has a certificate and a training record in hand, ready to show an auditor who asks how you train.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Owner, CEO and boardBriefing1 h 40 min
Business development and export salesBriefing1 h 40 min
Finance, pricing and tendersBriefing1 h 40 min
Marketing and communicationsBriefing1 h 40 min
Human resources and onboardingBriefing1 h 40 min
IT, data and validationBriefing1 h 40 min
Regulatory affairsStandard4 h 10 min
Quality assurance and Qualified PersonStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Supply chain, purchasing and logisticsStandard4 h 10 min
Pharmacovigilance and medicalStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Map the contract manufacturing supply chain and your place in it

    • Why sponsors hand you a step of their supply chain, and what they expect to get back.
    • How to tell where your site sits between the active ingredient maker and the pharmacy shelf.
    • The way a late step at your site reaches a hospital pharmacy, so you flag it before the client asks.
  2. 2Pitch your manufacturing services and therapeutic areas to buyers

    • How to describe what your site does in the words a client's sourcing lead uses to shortlist you.
    • When to claim a therapeutic area as a strength and when to say it is not your site's.
    • The one-minute answer that tells a visiting buyer what you make, for whom and why it is hard.
  3. 3Apply EudraLex Volume 4 to your daily cleanroom routines

    • Why EudraLex Volume 4 sets the gowning and hygiene steps your cleanroom procedures follow.
    • What to do when you see a possible cross-contamination risk during a material transfer.
    • Why an inspector watches how material enters the cleanroom, and how to move it the way they hope to see.
  4. 4Use your Quality Management System to raise and close deviations

    • How to write a deviation report your Quality Assurance reviewer approves without sending it back.
    • What happens to a batch from the moment a laboratory reports an out-of-specification result.
    • The route a corrective and preventive action takes through your quality system, from raising to closing.
  5. 5Work to Good Manufacturing Practice and Directive 2001/83/EC

    • Why Good Manufacturing Practice treats every label on a vial as a control point, not a print job.
    • How Directive 2001/83/EC and the marketing authorisation sit behind the batch you make for a client.
    • What an inspector looks for when they open your site master file.
  6. 6Brief clients on project progress without causing panic

    • How to deliver news of a batch delay so the client hears a plan before they hear a problem.
    • The wording that keeps a nervous client calm in the middle of a technology transfer.
    • What a status email must always state, so a client never learns of a problem from someone else.
  7. 7Track a project from signed contract to final delivery

    • Why technology transfer runs longer than clients expect, and how to say so before they plan around it.
    • The documents that need signatures before process validation can start, in the order you need them.
    • How to spot a scope change that arrives dressed as a small process adjustment.
  8. 8Use International Council for Harmonisation Q9 to prevent delays

    • How to back a small process change with a written quality risk assessment.
    • The early signs that a supply disruption is about to stop your line.
    • What to do when a risk assessment exposes a serious weakness in a process you have run for years.
  9. 9Sign every batch record to strict data integrity rules

    • Why one missing date on a batch record can hold a release the client is waiting for.
    • How data integrity principles change the way you write down a temperature check.
    • How to correct a wrong entry so the original stays readable and the auditor sees why.
  10. 10Answer client and regulatory auditor questions on the spot

    • What the Qualified Person needs in front of them before they certify a batch for release.
    • How to answer an inspector's question with the facts asked for and nothing you cannot support.
    • Where to find the response deadline set by the inspectorate or your client's quality agreement.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Contract manufacturer (CDMO / CMO). Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team