PharmaLectures.com

Courses › Pharma training by line of business › Week one at the API and intermediates maker: the company, the industry and Europe

Week one at the API and intermediates maker: the company, the industry and Europe

Your new hires stop sending batch record questions to your senior chemists in week one.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • API and intermediates makerwho it is written for

Why this training matters

A new operator on a Friday shift leaves one line of the batch record unsigned. Quality Assurance holds the batch in quarantine while a senior chemist traces the gap against International Council for Harmonisation (ICH) Q7. The customer waits for the ingredient, and the release slips into next week.

What changes after this course

Your new operators write the deviation on the same shift and send each record to the right department. Junior staff check batch records without pulling a senior chemist away. You hold a certificate for every learner and a training record for each person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your operator stops asking a senior chemist where things go. Raw material shortages go to supply chain, batch record corrections go to Quality Assurance, and Research and Development gets the yield data it needs before a scale-up. Each person sees how the shift feeds the active pharmaceutical ingredient a patient takes.

A junior Quality Assurance specialist checks a batch record against EudraLex Volume 4, Part II and ICH Q7. The missing signature and the illegible entry get caught at the desk, not at release. When an out-of-specification result arrives, the first hour follows a written path, and any new method is judged against ICH Q2.

Regulatory assistants draft the Active Substance Master File with the applicant's part and the restricted part in the right place. They know what Directive 2001/83/EC and the European Medicines Agency expect, and when a Certificate of Suitability is the better route. After a process change, they update the file and tell the customers who reference it.

Shift supervisors open a deviation the moment it happens and write it so Quality Assurance can close it. Every electronic record passes the attributable, legible, contemporaneous, original and accurate check. When a national competent authority inspector arrives, operators hand over the requested batch production record and answer plainly.

Who needs this training

  • Chemical Synthesis Production Operator

    A temperature drop interrupts a reaction on the night shift. They open the deviation before the shift ends, with the facts Quality Assurance needs, so the batch is not held while someone reconstructs what happened.

  • Junior Quality Assurance Specialist

    They review a batch record against EudraLex Volume 4, Part II, find the unsigned line, and send it back from the desk before it reaches the release decision.

  • Regulatory Affairs Assistant

    A customer asks for an update to the Active Substance Master File after a process change. They know which part to change and who to tell, so the review does not stall.

  • Supply Chain Coordinator

    A supplier delays a key intermediate. They tell the right production manager the same morning, with the affected batch named, and the schedule moves before the line sits idle.

  • Quality Control Analyst

    A High-Performance Liquid Chromatography result comes back out of specification at four in the afternoon. They know the first steps and who to inform, instead of retesting on their own.

Roles: every role in the company

Businesses: API and intermediates maker

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Route a batch record correction to the department that owns the error, with the message that department needs.
  2. Check a batch production record against EudraLex Volume 4, Part II and flag a missing signature or illegible entry.
  3. Sort an Active Substance Master File update into the applicant's part or the restricted part before sending it.
  4. Open a deviation report on the shift where the event happens, with the facts Quality Assurance asks for.
  5. Name the first steps after an out-of-specification result and the people who must be told.
  6. Test an electronic record against the five data integrity principles: attributable, legible, contemporaneous, original and accurate.
  7. Retrieve the batch production record an inspector requests and answer the follow-up question at the line.

What the company gets

  • Quality Assurance receives batch records with fewer unsigned lines and illegible entries, so release reviews stop circling back to the floor.
  • Your Active Substance Master File updates reach customers in the right part of the file, so their European submissions do not wait on you.
  • Your operators give a national competent authority inspector the requested records and straight answers, with data integrity gaps caught earlier by your own audit program.
  • Senior chemists get their hours back, because new hires route questions and deviations correctly from the first week.
  • You hold a certificate for each learner and a training record per person to show any auditor.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Owner, CEO and boardBriefing1 h 40 min
Business development and export salesBriefing1 h 40 min
Finance, pricing and tendersBriefing1 h 40 min
Marketing and communicationsBriefing1 h 40 min
Human resources and onboardingBriefing1 h 40 min
IT, data and validationBriefing1 h 40 min
Regulatory affairsStandard4 h 10 min
Quality assurance and Qualified PersonStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Supply chain, purchasing and logisticsStandard4 h 10 min
Pharmacovigilance and medicalStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Place your active pharmaceutical ingredient in the supply chain

    • How to say in one minute where your ingredient goes after it leaves the dock.
    • Why a delay on one intermediate reaches a finished medicine on a pharmacy shelf.
    • What to answer when a customer asks which step of their supply chain you cover.
  2. 2Send batch data to the exact department that needs it

    • Who gets the batch data when a result is off: Quality Assurance, Production or Regulatory Affairs.
    • What to do when Research and Development asks for yield data before a scale-up.
    • The one-line message that sends a raw material shortage to the right desk before the line stops.
  3. 3Trace the synthesis steps that create your final product

    • Why a reaction that works in the lab can fail in the reactor, and what you check first.
    • How to spot a crystallization problem in the process record before the batch is lost.
    • The purity and yield targets that decide whether a step is repeated or released.
  4. 4Apply ICH Q7 Good Manufacturing Practice to your daily tasks

    • How to read ICH Q7 as a list of things you do on shift, not a document for the library.
    • What happens to a batch when one signature is missing from the production record.
    • When a correction is allowed in a record and when it needs a deviation.
  5. 5Meet European Union requirements for medicinal products

    • Why Directive 2001/83/EC matters to your plant even when you never sell a finished medicine.
    • How to tell whether your ingredient can file a Certificate of Suitability or needs another route.
    • What the European Medicines Agency expects from the data behind a human-use medicine.
  6. 6Build an Active Substance Master File that reviewers can follow first time

    • What belongs in the applicant's part and the restricted part of your Active Substance Master File.
    • How to update the file after a process change so the review does not stop on an old version.
    • Why an outdated Active Substance Master File makes your customer's European submission wait.
  7. 7Stop out-of-specification results from delaying batch release

    • What to do in the first hour after an out-of-specification result appears.
    • How High-Performance Liquid Chromatography results decide whether a batch moves to release.
    • The ICH Q2 checks that show a new analytical method is fit before it judges a batch.
  8. 8Document a manufacturing deviation before the quality team steps in

    • How to write a deviation so Quality Assurance can close it without calling you back.
    • When a change needs a change control request and when it is a deviation.
    • Why a deviation logged on the same shift is easier to close than one found at batch review.
  9. 9Keep electronic records that meet core data integrity standards

    • How to check any electronic record against attributable, legible, contemporaneous, original and accurate.
    • What an inspector sees when one entry has no name and time next to it.
    • The shared login habit that an inspector reads as a data integrity failure.
  10. 10Hand inspectors the exact batch production records they request

    • How to pull the batch production record an inspector asks for without searching the archive.
    • What a national competent authority inspector asks an operator at the line.
    • The wording that moves an audit observation to a closed corrective action.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for API and intermediates maker. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team