PharmaLectures.com

Courses › GMP, GDP, quality and compliance › Not written down, did not happen: good documentation practice and batch record review

Not written down, did not happen: good documentation practice and batch record review

Your batch records reach the Qualified Person clean, so release is not held up.

Good documentation practice is the set of rules for how GMP records are written, corrected, reviewed and kept so that they tell the truth years later. In the European Union it is Chapter 4 of the EU GMP guide: entries made at the time, in indelible ink or a controlled electronic system, by an identifiable person; corrections made so the original stays readable, signed and dated, with the reason recorded where appropriate; records retained for the required periods. Batch record review is where those rules are tested before a Qualified Person certifies the batch.

  • 6 audio modulesthree lengths each
  • 1 h to 5 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • All technical staffwho it is written for

Why good documentation practice training matters

An inspector finds one crossed-out weight in a batch record with no date and no initials. She asks for three months of logbooks to rule out a wider data integrity problem. The batch sits in quarantine and the shipping date passes.

What changes after this course

Your technical staff write entries that hold up, and they catch gaps in review before the file reaches the Qualified Person. You hold a certificate for every learner and a training record for each person, ready for your next auditor.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

Good documentation practice training: what this course gives your people

Your operators stop leaving blank spaces and stop guessing at corrections. They write each entry so it is attributable, legible, contemporaneous, original and accurate. When a weight is wrong, they draw one line through it, add the date and initials, and leave the first figure readable for the inspector.

Quality assurance reviewers answer the audit trail question on the spot. They know what European Union Good Manufacturing Practice Annex 11 and 21 Code of Federal Regulations Part 11 ask of a computerized record and an electronic signature. A digital entry from last night gets checked, not sent back with a query.

Process engineers draft data collection tables that make a skipped time stamp hard to miss. Quality control analysts know what to do when the system is down and a result still needs recording. Both stop creating the gaps that the next reviewer has to chase.

The Qualified Person receives a batch file that already answers their questions before they ask. Your staff find the transcription error and the missing logbook entry in their own review. Real discrepancies are escalated that day, so final sign-off is not where problems first appear.

Who needs good documentation practice training

  • Production Operator

    You hold a pen over a batch record, unsure whether writing the right weight beside the wrong one means a deviation report tomorrow. After this course you know the correction that stands.

  • Quality Assurance Reviewer

    You open a digital logbook entry from last night and must decide whether its audit trail meets data integrity requirements. This course gives you the checks to decide before the batch moves on.

  • Quality Control Analyst

    The primary system is down, a result is ready, and you hesitate over a temporary paper form. This course shows how to record it so the entry still holds up later.

  • Process Engineer

    You draft a new standard operating procedure and design its data tables. Here you see how to lay them out so an operator cannot skip a mandatory time stamp.

Roles: Quality assurance and Qualified Person, Quality control and laboratory, Production and engineering, IT, data and validation

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Correct a mistaken entry on a paper batch record while keeping the original data readable.
  2. Check that an electronic entry and its audit trail meet data integrity requirements before release.
  3. Apply the attributable, legible, contemporaneous, original and accurate principles to every entry you make.
  4. Find missing initials, blank spaces and transcription errors during a batch record review.
  5. Lay out a data table in a standard operating procedure so a mandatory time stamp cannot be skipped.
  6. Assemble a batch file that answers the Qualified Person's questions before they ask them.

What the company gets

  • Batches wait less at the final release decision, because the Qualified Person finds a clean, complete file.
  • An inspector who asks about data integrity gets a straight answer, backed by a certificate and a training record for each person.
  • Quality assurance spends less time chasing operators for missing signatures and initials.
  • Backdated entries and unreadable corrections stop appearing in your records, and the risk that comes with them goes too.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 6 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard2 h 30 min25 min a module, for regulatory, quality and business-development staff
Expanded5 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
IT, data and validationBriefing1 h
Quality assurance and Qualified PersonExpanded5 h
Quality control and laboratoryExpanded5 h
Production and engineeringExpanded5 h

Good documentation practice course outline: 6 modules

6 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Protect patients by writing every entry to Good Documentation Practice

    • Why a missing signature on one step can put a whole batch in question.
    • Why an inspector reads your equipment logbook as closely as the batch record.
    • How your handwriting on a routine shift protects the patient who takes the medicine months later.
  2. 2Apply European Union Annex 11 and 21 Code of Federal Regulations Part 11

    • What makes an electronic signature valid under 21 Code of Federal Regulations Part 11.
    • How to correct a digital entry under Annex 11 without leaving a gap in the audit trail.
    • The moment a computerized record becomes official, and what nobody may change after it.
  3. 3Write entries in every official document that an inspector can accept

    • How to make every entry attributable and accurate, even on a form you have never seen before.
    • The one way to correct a paper entry so the original stays readable and the inspector stays calm.
    • Why writing up a step hours later breaks the entry, even when every number is right.
  4. 4Trace the flow of a batch record and spot its critical structures

    • What an inspector looks for first in your daily equipment logbook.
    • How a standard operating procedure step becomes a batch record line, and where it gets lost.
    • The missing structural piece that holds up a batch release decision.
  5. 5Prevent the documentation errors that become regulatory findings

    • Which blank spaces draw an inspector's observation, and how to close them before sign-off.
    • How to document a deviation at the moment it happens, before it grows into a finding.
    • What to do when an entry needs amending days after the action, and how to write it.
  6. 6Run a batch record review that the Qualified Person can sign off on

    • What the Qualified Person needs to see on the page before signing the batch.
    • How to spot a transcription error buried deep in a long batch record.
    • What to do when you find a discrepancy, so production stops only when it should.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about good documentation practice training

What is good documentation practice?

It is the discipline that makes a record trustworthy: write it when the action happens, write it so it can be read, sign it so the person is known, never use pencil or correction fluid, and keep it where it can be found for the whole retention period. Chapter 4 of the EU GMP guide sets these rules for paper and electronic records alike, and many data integrity findings start with one of them being broken.

Is GDP documentation practice the same as good distribution practice?

No, and the shared initials cause real confusion. Good documentation practice is about how records are written and kept, covered by EU GMP Chapter 4. Good distribution practice is a separate set of EU guidelines, published in 2013, on how medicines are stored and transported by wholesalers and distributors. Which of the two applies depends on a company's activities, and a course on one does not cover the training needs of the other.

What are the rules for correcting a GMP record?

EU GMP Chapter 4 states that any alteration must be signed and dated and must leave the original information readable, and that the reason should be recorded where appropriate. In practice that means a single line through the wrong entry, the correct entry beside it, initials, date and a short reason. Blank fields are struck through or marked not applicable, and electronic systems record changes to entries through an audit trail.

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

6 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h in the briefing length and 5 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for All technical staff. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team