PharmaLectures.com

Courses › GMP, GDP, quality and compliance › ICH Q7 without the coma: GMP for API, chapter by chapter

ICH Q7 without the coma: GMP for API, chapter by chapter

Your team answers the inspector at the line, without waiting for you to arrive.

  • 15 audio modulesthree lengths each
  • 2 h 30 min to 12 h 30 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • API staffwho it is written for

Why this training matters

An inspector stops at an active pharmaceutical ingredient (API) batch record and asks why a critical in-process control was signed off without its limit checked. Nobody on the shift can say which chapter requires it. The batch goes on hold and the customer's order waits.

What changes after this course

Your operators, analysts and supervisors work to the International Council for Harmonisation Q7 guide (ICH Q7) for API Good Manufacturing Practice, chapter by chapter. You hold a certificate for each learner and a training record for each person, ready for the next auditor.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

On the production floor, your supervisors stop guessing about in-process controls. They apply Chapter 8 of the International Council for Harmonisation Q7 guide to time limits, sampling and out-of-limit results, so a deviation is caught at the step where it happens. The batch record reaches the quality unit complete, not marked up in red.

In the laboratory, an analyst facing an out-of-specification result opens Chapter 11 and knows what comes next: who is told, what is investigated, when a retest is justified and how it is written down. Certificates of analysis and secondary reference standards follow the same chapter, so the answer to the reviewer is already on paper.

Quality assurance staff write validation protocols under Chapter 12 that name every critical parameter, and they sort proposed changes under Chapter 13 before anyone touches the equipment. Facility and engineering colleagues keep the Chapter 4 and Chapter 5 records, cleaning, calibration and maintenance, in a form an auditor can follow without asking you.

When a batch fails, your quality unit decides under Chapter 14 whether it may be reprocessed, reworked or stays rejected. A customer complaint is logged and judged under Chapter 15, including the call on a recall. Before the official inspection, your auditors check each contract manufacturer against Chapter 16 and close the gaps.

Who needs this training

  • Quality Assurance Specialist

    Your validation protocols stop coming back for missing detail, because you write to Chapter 12 and sort changes under Chapter 13 before anyone touches the line.

  • Production Supervisor

    When an in-process control drifts in the middle of a night shift, you apply Chapter 8 on the spot and the batch record reaches review complete.

  • Quality Control Analyst

    An out-of-specification result lands on your bench. You follow Chapter 11 step by step, and the retest carries a written reason the reviewer can read and accept.

  • Warehouse and Distribution Coordinator

    Your storage conditions, stock rotation and shipment records meet Chapter 10, so tracing a shipment during a recall takes one search, not days of digging.

  • Supplier Quality Auditor

    You plan the contract manufacturer audit against Chapter 16 and bring back findings with corrective actions the site can close before the authorities visit.

Roles: Quality control and laboratory, Production and engineering

Businesses: API and intermediates maker

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Draft an active pharmaceutical ingredient quality management system that follows Chapter 2, including the independence of the quality unit.
  2. Approve or reject a raw material supplier using the receipt, quarantine and testing steps of Chapter 7.
  3. Write a process validation protocol under Chapter 12 that names each critical parameter and its acceptance limit.
  4. Classify a proposed manufacturing change under Chapter 13 and route it to the right approval before work starts.
  5. Decide whether a rejected batch may be reprocessed or reworked under Chapter 14, and write down why.
  6. Log a customer complaint and set out the recall decision steps required by Chapter 15.
  7. Plan an audit of a contract manufacturer against Chapter 16 and record the findings and corrective actions.

What the company gets

  • Batches reach quality review with fewer documentation errors, because operators know which batch record entries a reviewer looks for.
  • Your change control records under Chapter 13 show who approved what and when, so the inspector's questions have written answers.
  • Raw material approval decisions under Chapter 7 are made by your own people on the day, without waiting for a senior manager.
  • Internal audits under Chapter 2 find facility and maintenance gaps while you can still fix them, before an inspector writes them up.
  • Each learner has a certificate and a training record, so the file an auditor asks for is already in your hands.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 15 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing2 h 30 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard6 h 15 min25 min a module, for regulatory, quality and business-development staff
Expanded12 h 30 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality control and laboratoryExpanded12 h 30 min
Production and engineeringExpanded12 h 30 min

Course outline: 15 modules

15 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Apply ICH Q7 to your APIs and pinpoint where its scope begins

    • How to point to the API starting material in your process and defend that choice to an inspector.
    • Why Table 1 in Chapter 1 sets how strictly each kind of step must follow Good Manufacturing Practice.
    • What the guide leaves out, so you stop applying API rules to finished dosage form steps.
  2. 2Build an API quality system that satisfies Chapter 2

    • Why the quality unit must stay independent of production, and how to show it on paper.
    • How to assemble the product quality review so it is ready before the auditor asks for it.
    • The internal audit routine from Chapter 2 that finds your gaps before an inspector does.
  3. 3Assign API personnel responsibilities in writing under Chapter 3

    • The training file entries inspectors check for each operator, ready before they ask.
    • How to write down hygiene and health rules for operators so a supervisor can enforce them.
    • Why consultants need documented qualifications too, and what their record must show.
  4. 4Maintain API facilities so they pass Chapter 4 audits

    • How to lay out material and personnel flow so one batch cannot contaminate the next.
    • When highly sensitising materials such as penicillins or cephalosporins need dedicated facilities.
    • The sanitation and maintenance records that show an auditor your building is under control.
  5. 5Clean and calibrate process equipment under Chapter 5 rules

    • How to write the equipment cleaning procedure that stops cross-contamination between batches.
    • How to set calibration intervals you can justify when the inspector asks why that interval.
    • Why equipment placement must support cleaning and maintenance, and how to show it on the plant floor.
  6. 6Approve or reject raw materials using Chapter 7 standards

    • How to qualify a new raw material supplier without stopping the line.
    • What to do when an incoming material fails its first test while it sits in quarantine.
    • The identity test and container checks that keep wrong material out of production.
  7. 7Sample and test in-process API batches following Chapter 8

    • How to set time limits for production steps and record it when one is missed.
    • What to do when an in-process control falls outside its set limits, before the next step starts.
    • How to record in-process results and deviations so the quality unit can review the batch first time.
  8. 8Package and label APIs without mix-ups under Chapter 9

    • How to choose containers that protect the API from deterioration during transport and storage.
    • The label reconciliation that exposes a mix-up before the shipment leaves.
    • Why a line clearance check before packaging starts keeps the last batch's labels away from the next.
  9. 9Store and distribute API inventory to meet Chapter 10

    • How to hold warehouse conditions inside set limits and prove it with records.
    • How to run stock rotation so no API passes its retest date on a shelf.
    • What a distribution record must show so you can trace every shipment if a recall starts.
  10. 10Handle out-of-specification lab results using Chapter 11

    • How to structure an out-of-specification investigation that holds up in review.
    • How to qualify a secondary reference standard against the primary one, with records to show it.
    • What a certificate of analysis must carry before a customer receives it.
  11. 11Validate your API manufacturing processes to Chapter 12 standards

    • How to write a process validation protocol that names every critical parameter.
    • The cleaning validation limits you justify so equipment is cleared for the next product.
    • When a change forces revalidation and when a documented assessment is enough.
  12. 12Document API process changes through Chapter 13 change control

    • How to classify a proposed change so it reaches the right level of approval first time.
    • The paperwork the quality unit needs before it approves new equipment or a new process step.
    • Why a change made first and documented later becomes an audit finding.
  13. 13Decide on reprocessing or reworking rejected batches under Chapter 14

    • When a batch may be reprocessed and when it needs reworking under a documented procedure.
    • The records you need before recovered solvents go back into the process.
    • What to do with a rejected intermediate that cannot be saved: identify it, quarantine it, record it.
  14. 14Investigate API product complaints and recalls using Chapter 15

    • How to log a complaint so the first investigation starts at once.
    • How to write the procedure that decides whether a complaint leads to a recall.
    • Why a recall procedure names who does what, and how to assign those roles.
  15. 15Audit contract manufacturers following Chapter 16

    • How to plan audits of contract manufacturers that find gaps before the authorities do.
    • The written agreement that sets quality responsibilities between you and each contract site.
    • How to follow up a contractor audit finding so the correction is verified and recorded.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

15 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 2 h 30 min in the briefing length and 12 h 30 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for API staff. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 135 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team