PharmaLectures.com

Courses › Pharma training by country › From American GMP to EU GMP: the gap list, and how to close it

From American GMP to EU GMP: the gap list, and how to close it

Your batches clear European inspection because your team closed the gaps first.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • United States companieswho it is written for

Why this training matters

An inspector from a European authority opens your batch record and asks for the risk assessment Chapter 1 requires. You have a Food and Drug Administration procedure, not that. The batch stays on hold while your team rewrites documents, and the buyer keeps asking for a date.

What changes after this course

Your team finds the gaps between Parts 210 and 211 and EudraLex Volume 4 before the inspector does, and fixes the documents once. You hold a certificate for every learner and a training record for each person. Each module ends with a recorded questionnaire.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your regulatory affairs lead stops asking an outside consultant which procedures to rewrite. They lay 21 Code of Federal Regulations Parts 210 and 211 beside EudraLex Volume 4, mark each gap, and decide the same day what changes first. The Chapter 1 quality system and the Qualified Person's data needs become one short list, not a guess.

On the production floor, managers check their cleanroom monitoring against Annex 1 and their equipment qualification against Annex 15 before the inspector arrives. Operators record each manufacturing step the way Chapter 4 and Annex 11 expect, so the batch file reaching the Qualified Person is already complete and needs no chasing.

Laboratory and quality staff treat an out-of-specification result as Chapter 6 requires, with the investigation documented and a retest justified in writing. Quality assurance drafts Chapter 7 quality agreements that name who releases, who investigates and who reports, and audits contract sites with a checklist the inspector recognizes.

When a customer complaint arrives, the team follows Chapter 8: log it, assess the defect, decide on a recall, and tell the competent authority in each affected member state. Returned goods get a disposition decision on paper. The site master file and training records sit ready, so a visit from an inspector is a normal day.

Who needs this training

  • Quality Assurance Manager

    You hold the gap list in your head and a half-finished spreadsheet. After the course your team lays Part 211 against EudraLex Volume 4 and hands you a finished list of missing controls with the fix beside each.

  • Regulatory Affairs Specialist

    A European launch is planned and your Chapter 4 documents have to survive an inspection. You stop second-guessing the retention rule and the data integrity entries, and send files that answer the reviewer's questions the first time.

  • Head of Manufacturing Operations

    Your lines run to American practice and the European importer wants cross-contamination reasoning on paper. Your engineers document exposure limits and revalidation triggers under Chapters 3 and 5 and Annex 15 before the visit.

  • Site Director

    An inspection date is on the calendar. You walk in with the site master file and a Chapter 2 training record for each person, and the operators on the floor can answer the inspector plainly.

  • Supplier Quality Manager

    Your contract manufacturer changed a step last quarter and the agreement does not cover it. You rewrite the Chapter 7 agreement so changes, investigations and reporting each have a named owner.

Roles: Quality assurance and Qualified Person, Quality control and laboratory, Production and engineering

Businesses: every kind of pharma company

Countries: United States

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Map each requirement of 21 Code of Federal Regulations Part 211 to its EudraLex Volume 4 counterpart and list what your procedures lack.
  2. Write a quality risk assessment under Chapter 1 and International Council for Harmonisation Q9 that fits your existing quality manual.
  3. Draft a Chapter 7 quality agreement that names who releases, who investigates and who reports to the authority.
  4. Format specifications, master formulae and batch records to the Chapter 4 documentation rules, including retention periods.
  5. Run an out-of-specification investigation as Chapter 6 requires, and record each decision and its justification.
  6. Log a complaint and start a recall under Chapter 8, including notice to the competent authority in each affected member state.
  7. Answer an inspector's questions about your site, using the site master file and the training record of each person.

What the company gets

  • Your batches reach the Qualified Person with complete records, so they are not held back for missing Chapter 1 and Chapter 4 documents.
  • An inspector asks for procedures and training records and receives them from one place, with a certificate and a training record for every learner.
  • Your contract manufacturing sites work under written quality agreements, so a process change or a deviation has a named owner before it becomes a finding.
  • The gaps in your quality system are closed in one pass, which protects the launch date your buyer is waiting on.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Map the gaps between American Parts 210 and 211 and EudraLex Volume 4

    • How to lay Part 211 beside EudraLex Volume 4 and mark every missing control on one sheet.
    • Why the Qualified Person has no twin in your quality unit, and what that changes at batch release.
    • The American routines you can keep, and the ones a European inspector reads as a missing control.
  2. 2Upgrade your quality system to pass EudraLex Volume 4 Chapter 1

    • Why a quality system that passes a Food and Drug Administration audit still fails the Chapter 1 test.
    • How to add International Council for Harmonisation Q9 risk assessments without rewriting your manual.
    • The batch data a Qualified Person checks before certifying, and where it lives in your records now.
  3. 3Train your staff to the personnel standard of EudraLex Volume 4 Chapter 2

    • The hygiene and health records an inspector asks for first, and who in your plant owns each one.
    • How to show in writing that your key personnel have the authority Chapter 2 expects them to hold.
    • What to do when your training log proves attendance but not the effect Chapter 2 asks for.
  4. 4Adapt your facilities and Annex 11 systems for European inspectors

    • Which Chapter 3 and Annex 1 checks to run on your own site before an inspector walks the rooms.
    • How to show that your computerized systems meet Annex 11, and where it asks more than Part 11 does.
    • Why Annex 1 expects a written contamination control strategy even when your aseptic line runs clean.
  5. 5Write specifications and master formulae that pass Chapter 4 scrutiny

    • How to set Chapter 4 retention periods for batch records and apply them to the archive you hold today.
    • The specification and master formula layout that lets a Qualified Person trace each material fast.
    • What a data integrity gap looks like in a manufacturing record, and how to close it at the point of entry.
  6. 6Prevent cross-contamination and validate processes for European markets

    • How to segregate materials so an inspector accepts your cross-contamination reasoning on the spot.
    • Why Chapter 5 asks for a health-based exposure limit on shared equipment, and how to document yours.
    • When a process needs revalidation under Annex 15 and when continued process verification is enough.
  7. 7Handle out-of-specification results under Chapter 6

    • How a Chapter 6 out-of-specification investigation is documented, in the order an inspector reads your file.
    • When a retest is allowed and when it looks like testing into compliance to a European auditor.
    • What the laboratory records so your stability data supports the shelf life you claim in Europe.
  8. 8Draft Chapter 7 quality agreements for European contract manufacturing

    • How to write a Chapter 7 quality agreement that says who releases, who investigates and who reports.
    • The checks that make a contract site audit stand up when the inspector asks to see it.
    • What to do when your contract acceptor changes a process and your agreement says nothing about it.
  9. 9Process complaints and run recalls under Chapter 8 rules

    • How to log a market complaint so the Chapter 8 file answers the inspector's first questions.
    • What your Chapter 8 recall procedure must say about alerting authorities in each affected member state.
    • What to do with a returned product so its disposition decision stands up in a European file.
  10. 10Prepare your site and staff for a European manufacturing inspection

    • How to build the site master file so the inspector's first document request is answered from one shelf.
    • The questions inspectors put to operators on the floor, and the plain answers that keep the audit moving.
    • Why the Qualified Person's certification decides your shipment, and what the batch file must hold for it.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for United States companies. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team