PharmaLectures.com

Courses › Pharma training by country › From Taiwanese GMP to EU GMP: the gap list, and how to close it

From Taiwanese GMP to EU GMP: the gap list, and how to close it

Your team answers the European inspector on the spot, and the launch date holds.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Taiwan companieswho it is written for

Why this training matters

The European inspector opens your Pharmaceutical Quality System manual and asks who approves a change to a validated process. Three people in the room give three answers. The finding is written down, and your market entry slips while you fix it.

What changes after this course

Your team walks in with procedures built on EudraLex Volume 4 and answers questions on cross-contamination and data integrity without a pause. You hold a certificate for every learner and a training record per person, ready to hand over.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your quality assurance manager stops guessing which parts of EudraLex Volume 4 your site misses. The gap list sits on one page, ranked by what an inspector sees first. The Pharmaceutical Quality System manual gets rewritten to Chapter 1, with management responsibilities and the Product Quality Review stated plainly, so page one already answers the desk review.

On the production floor, the manager decides without waiting for a consultant. Chapter 5 rules on starting materials and cross-contamination turn into floor instructions, Annex 15 sets when a change needs revalidation, and Chapter 4 shapes the batch record so each signature tells the inspector who did what, and when.

In the laboratory, an out-of-specification result no longer stalls the day. The head of quality control follows Chapter 6 from first check to documented conclusion, and qualifies reference standards before the audit. Meanwhile purchasing drafts Chapter 7 technical agreements that name who does what at the contract manufacturer and at the supplier.

Before the inspection, the regulatory team assembles the Site Master File and the documents the inspector asks for first. Chapter 9 self-inspections find facility and procedure problems early. When a defect appears, Chapter 8 tells the team who is informed, when the investigation starts, and when a recall is on the table.

Who needs this training

  • Quality Assurance Manager

    Rewrites the quality manual to Chapter 1 before the desk review, and answers the inspector's question about management responsibility with a page number instead of a promise.

  • Production Manager

    Faces the inspector on the floor, where Chapter 5 cross-contamination and Annex 15 validation questions are asked next to the equipment, and answers them with records in hand.

  • Head of Quality Control

    Defends out-of-specification investigations, reference standards and method validation under Chapter 6, and keeps one result from turning into a wider data integrity inquiry.

  • Regulatory Affairs Specialist

    Assembles the Site Master File and the document set before inspection day, so the inspector's first request is answered in the room and not by email.

  • Purchasing and Supplier Quality Manager

    Drafts the technical agreements and supplier audits under Chapter 7, the paper an inspector reads to see who is responsible when a contractor makes an error.

Roles: Quality assurance and Qualified Person, Quality control and laboratory, Production and engineering

Businesses: every kind of pharma company

Countries: Taiwan

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Draft a Pharmaceutical Quality System manual that states management responsibilities as Chapter 1 requires.
  2. Build a training record that shows who was trained on which procedure, ready for the Chapter 2 inspector.
  3. Mark cross-contamination paths on your floor plan and match your qualification schedule to Annex 15.
  4. Structure a batch record under Chapter 4 so every entry shows who did what, and when.
  5. Investigate an out-of-specification laboratory result in the order Chapter 6 expects.
  6. Write a quality technical agreement that assigns duties between you and a contract manufacturer under Chapter 7.
  7. Check your recall procedure against Chapter 8 and list what is missing.

What the company gets

  • Your site goes into a European inspection with its gap list worked through and a plan for what remains.
  • Your European buyer gets straight answers on laboratory results, because the Quality Control lab follows Chapter 6 and the records show it.
  • Batch files reach the Qualified Person complete, so release is not held while someone hunts for a missing signature.
  • Your management team answers the inspector directly, and the certificates and training records show who was trained on what.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Close the gap between Taiwan rules and EudraLex Volume 4

    • How to build a gap list that shows your director which European requirements your site misses.
    • Why Part I, Part II and the annexes of EudraLex Volume 4 apply to different products on your site.
    • What to do when a Taiwan procedure and a European rule disagree, and who signs off the change.
  2. 2Build a Pharmaceutical Quality System that passes European Chapter 1

    • How to run a Product Quality Review that your management can defend line by line.
    • The management responsibilities Chapter 1 expects in writing, so your director signs with eyes open.
    • When quality risk management earns its place in a decision and when it only adds paperwork.
  3. 3Qualify your personnel to hold up under European Chapter 2 scrutiny

    • Who counts as key personnel under Chapter 2, and what the inspector asks each of them.
    • How to keep a training record that shows who was trained on which procedure, and when.
    • Why the heads of production and quality control must stay independent, and how your chart shows it.
  4. 4Upgrade facilities and equipment to meet European Chapter 3

    • How to read your floor plan the way an inspector does, looking for cross-contamination paths.
    • Why a qualification schedule built to Annex 15 answers equipment questions before the inspector asks.
    • What to do when a cleaning or maintenance record has a gap on the day the inspector asks for it.
  5. 5Write standard operating procedures that clear European Chapter 4 review

    • How to write a standard operating procedure that the operator on the line can follow without asking.
    • The batch record entries that show an inspector who did what, when, and why a change was made.
    • Why handwritten and electronic records need different controls, and what the inspector checks in each.
  6. 6Run your production floor to European Chapter 5 rules

    • How to trace a starting material from the delivery note to the finished batch record.
    • When a change needs revalidation under Annex 15 and when a documented review is enough.
    • The Chapter 5 checks that keep one product's residues out of the next product's batch.
  7. 7Operate your Quality Control lab to clear European Chapter 6

    • How to investigate an out-of-specification result so the first retest is not what the inspector questions.
    • What the inspector expects to see on a reference standard and a reagent before it is used.
    • Why transferring or updating an analytical method needs a written record before the first batch is tested.
  8. 8Audit contractors and suppliers under European Chapters 5 and 7

    • What a technical agreement must say about who does what, so a contractor's error is not left with you.
    • How to approve and audit a starting material supplier to the standard Chapters 5 and 7 expect.
    • The oversight of a contract manufacturer that an inspector wants to see on paper, not in your memory.
  9. 9Handle complaints and self-inspections under European Chapters 8 and 9

    • How to log a complaint so the investigation starts the same day and the record holds up later.
    • When a quality defect must be reported to the authorities and when it stays an internal investigation.
    • The self-inspection programme that finds your gaps before the inspector does, and gets them closed.
  10. 10Pass your European inspection without critical findings

    • Which documents to have on the table before the inspector sits down, starting with the Site Master File.
    • How to answer an observation on the spot so it does not grow into a formal finding.
    • What a corrective action plan needs so the authority can close the finding.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Taiwan companies. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team