PharmaLectures.com

Courses › Pharma training by country › From Pakistani, Bangladeshi and Vietnamese GMP to EU GMP: the gap list, and how to close it

From Pakistani, Bangladeshi and Vietnamese GMP to EU GMP: the gap list, and how to close it

Send your next export batch to Europe without an inspector finding the gap first.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Pakistan, Bangladesh and Vietnam companieswho it is written for

Why this training matters

An inspector opens your batch record and finds no link between the master formula and what the operator signed. The report lists a critical finding against European Union Good Manufacturing Practice (EU GMP). Your European partner pauses the contract while your team rewrites procedures.

What changes after this course

Your team finds the gaps first, in its own self-inspection, and closes them in the documents an inspector asks for. You hold a certificate per learner and a training record per person, ready to hand over. The auditor meets a team that knows why each rule exists.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your regulatory affairs lead opens EudraLex Volume 4 next to your national rules, such as those of the Drug Regulatory Authority of Pakistan, the Directorate General of Drug Administration in Bangladesh or the Drug Administration of Vietnam, and shows where they differ. A question from a European authority gets an answer the same afternoon. Quality managers rewrite the quality system to match Chapter 1.

On the floor, production supervisors clear lines and separate products the way Chapter 5 asks, and the cross-contamination finding stops coming back. Maintenance keeps one file per machine that fits Chapter 3. Operators know what to record, and the Chapter 2 matrix shows who trained them, when the inspector stops at their bench.

The batch record reaches the Qualified Person complete under Chapter 4, so certification under Annex 16 does not wait for missing pages. In the laboratory, an out-of-specification result starts the Chapter 6 investigation instead of a quiet retest, and analysts can show how each method they run was validated.

Supply chain staff draft quality agreements with contract manufacturers that name who does what under Chapter 7. When a defect reaches a customer, your people classify it and act under Chapter 8, and corrective and preventive action files read as finished. Internal auditors then find the gap before the European inspector does.

Who needs this training

  • Quality Assurance Manager

    The Qualified Person is waiting on a batch file and three pages are missing. With the Chapter 4 layout in place, the file is complete before release, and the export shipment leaves on its date.

  • Production Supervisor

    An inspector walks your shared line and asks how you know the last product is gone. With Chapter 5 line clearance and separation in place, you answer from the record, not from memory.

  • Head of Quality Control

    An auditor holds an out-of-specification report and asks why the retest was run. The Chapter 6 investigation steps give you the written answer and the method validation behind it.

  • Regulatory Affairs Specialist

    A European authority sends a question about your quality system on a Monday morning. You answer from a clause-by-clause map of EudraLex Volume 4, not from an outside consultant's email.

  • Contracts and Supply Chain Manager

    Your contract manufacturer is named in an inspection report. The Chapter 7 quality agreement tells you who owns the investigation and who informs the authority.

Roles: Quality assurance and Qualified Person, Quality control and laboratory, Production and engineering

Businesses: every kind of pharma company

Countries: Pakistan, Bangladesh and Vietnam

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Produce a clause-by-clause gap list between EudraLex Volume 4 and your national rules, with an owner named for each gap.
  2. Build a training matrix that links each role to its procedures and its proof of competence, as Chapter 2 expects.
  3. Lay out a batch record that a Qualified Person can certify under Chapter 4 and Annex 16 without chasing missing pages.
  4. Run a documented out-of-specification investigation under Chapter 6, from the first result to closure.
  5. Draft a quality agreement that names who approves changes, who audits and who keeps the data, as Chapter 7 expects.
  6. Classify a product defect and decide whether it triggers a recall and a report to the European authority under Chapter 8.
  7. Run a self-inspection and write findings with an owner and a date for each one.

What the company gets

  • Your site enters a European inspection with its gaps already listed, owned and closed, instead of reading them for the first time in the inspector's report.
  • Your quality team stops rewriting rejected batch records and procedures, and batch release no longer waits for missing pages.
  • Your European partner gets a straight answer on contract manufacturing duties, because the quality agreement already says who does what.
  • You hold a certificate per learner and a training record per person, ready to put on the table when an inspector asks for proof of training.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Map EudraLex Volume 4 to your local rules and answer European authorities

    • Why a licence from your national authority does not carry weight with a European inspector.
    • How to build a gap list, clause by clause, between EudraLex Volume 4 and your own rules.
    • The Part I and Part II split that shows which rules cover finished products and which cover active substances.
  2. 2Rewrite your Quality Management System to pass an EU GMP Chapter 1 audit

    • What a Chapter 1 audit looks for in management review, and the minutes that show you held one.
    • How to use International Council for Harmonisation Q9 so deviation reports show why you rated the risk.
    • The product quality review that Chapter 1 expects, and the data your team already holds to write it.
  3. 3Build an EU GMP Chapter 2 training matrix that proves staff follow the rules

    • Why a signed attendance sheet fails Chapter 2, and the record that proves a person can do the task.
    • How to define the duties of the heads of production and quality control, and of the Qualified Person.
    • What to do when an inspector points at an operator and asks what training they had on that exact step.
  4. 4Bring maintenance and facility files up to the EU GMP Chapter 3 standard

    • How to make the calibration schedule and the maintenance file for each machine tell the same story.
    • The layout questions in Chapter 3 that decide whether a shared line can stay shared.
    • What to do when the logbook for purified water or air handling has a gap on the day of inspection.
  5. 5Structure batch records the way EU GMP Chapter 4 needs them for release

    • Why a batch record that is complete by local standards still fails Chapter 4 at release.
    • How to link the master formula, the batch record and the instructions so no step depends on memory.
    • The data integrity checks that let a Qualified Person sign without calling the floor for missing pages.
  6. 6Stop cross-contamination findings with EU GMP Chapter 5 controls

    • How to separate products on a shared line so mix-ups and cross-contamination stop showing up as findings.
    • The line clearance step an inspector watches an operator perform, and the words that belong on the record.
    • When a dedicated facility is needed and when a Chapter 5 risk assessment supports shared equipment.
  7. 7Handle out-of-specification results and validate methods per EU GMP Chapter 6

    • Why an out-of-specification result needs a documented investigation before anyone retests the sample.
    • How to show that a method was validated for your product and not only copied from a pharmacopoeia.
    • The records from sample receipt to final result that let an inspector trace one result from end to end.
  8. 8Draft quality agreements with contractors that hold up under EU GMP Chapter 7

    • How to split duties between contract giver and acceptor so no task belongs to nobody.
    • The clauses a quality agreement needs on change control, audits and who holds the batch data.
    • What to do when your contract manufacturer receives an inspection finding that touches your product.
  9. 9Run a product recall and file corrective actions that meet EU GMP Chapter 8

    • How to sort a complaint into a quality defect, and decide on the spot whether it is a recall.
    • When a defect must be reported to the European authority, and who in your company makes that call.
    • Why a corrective and preventive action plan gets sent back, and the root cause line that gets it accepted.
  10. 10Run a self-inspection that finds the deviations EU auditors look for

    • How to build a self-inspection checklist from EU GMP Part I, so your auditors ask what an inspector asks.
    • The report format that gets findings closed, with an owner and a date, before the inspector arrives.
    • What to say when an inspector names a gap in your system and you already have it on your own list.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Pakistan, Bangladesh and Vietnam companies. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team