PharmaLectures.com

Courses › Pharma training by country › From Japanese GMP to EU GMP: the gap list, and how to close it

From Japanese GMP to EU GMP: the gap list, and how to close it

Your team hands a European inspector the right record in minutes, not days.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Japan companieswho it is written for

Why this training matters

The European inspector asks for the training record of one packaging operator. You hand over a Japanese-format file that never mentions EudraLex Volume 4, the European Union (EU) guide to Good Manufacturing Practice (GMP). The finding goes on the report, and your first shipment waits.

What changes after this course

Your people open EudraLex Volume 4 and know which of your Japanese records already pass and which need a change. They fix the gaps before the inspector arrives. You hold a certificate for every learner and a training record for each person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your quality assurance team stops guessing what Part I of EudraLex Volume 4 asks for. They open a Japanese procedure, know in minutes whether it passes, and rewrite only the ones that fail. The quality manual, the management review and the product quality review land in the form Chapter 1 expects.

Production managers sign batch records knowing each entry meets Chapter 4, and that electronic systems meet Annex 11 on computerised systems. When an in-process check fails on a batch for Europe, the operator follows the Chapter 5 deviation rules, and a competent person approves any deviation in writing.

The quality control laboratory answers an out-of-specification result the way Chapter 6 asks, with the reference standard and method validation files already in order. Analysts update their method reports before a European inspector requests them, and the investigation file reads clearly to a stranger.

A supply chain team drafts technical agreements under Chapter 7 that state what the contract giver keeps. A complaint from Europe goes through Chapter 8 with a clear decision on whether to tell the authorities, and the site audit team knows who brings which record to the room.

Who needs this training

  • Quality Assurance Manager

    An inspector asks for your quality manual, and you hand over a document that shows where each Japanese procedure meets Chapter 1 of EudraLex Volume 4.

  • Production Manager

    A batch for Europe fails an in-process check at the line, and your operators follow the Chapter 5 route the same shift instead of waiting for a decision from above.

  • Head of Quality Control

    An analyst records an out-of-specification result on a Friday, and your team opens the Chapter 6 investigation that day with the reference standard records already in order.

  • Regulatory Affairs Specialist

    A European authority announces a site inspection, and you check your qualification and validation files against Annex 15 before anyone else asks whether they are ready.

  • Training Coordinator

    A European inspector asks how you know an operator can do the task, and you open the training record that shows the assessment, the date and the signature.

Roles: Quality assurance and Qualified Person, Quality control and laboratory, Production and engineering

Businesses: every kind of pharma company

Countries: Japan

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Mark each gap between a Japanese procedure and the matching chapter of EudraLex Volume 4, and say which ones need a rewrite.
  2. Build a training matrix that links every operator to every procedure and holds up under a Chapter 2 check.
  3. Write an equipment qualification protocol whose layout and test links meet what Annex 15 expects.
  4. Set in-process limits and record sheets for the line that satisfy Chapter 5.
  5. Draft a technical agreement that states the duties of the contract giver under Chapter 7.
  6. Open an out-of-specification investigation that follows Chapter 6 from the first result to the closed file.
  7. Decide whether a quality defect must be reported to European authorities under Chapter 8, and write the notification.

What the company gets

  • Your site goes into a European inspection with a quality manual, training records and validation files that already speak the language of EudraLex Volume 4.
  • Your quality team stops spending weeks turning Japanese procedures into European formats, because they know which ones need changing and which ones already pass.
  • The European Qualified Person finds the batch documentation complete on arrival, so release does not wait on questions sent back to Japan.
  • Your company holds a certificate for each learner and a training record for each person, ready to hand to an inspector or a buyer's auditor.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Translate Japanese Good Manufacturing Practice into EU rules

    • How to set Japan's GMP ordinance beside EudraLex Volume 4 and mark each gap in one sitting.
    • Why a line-by-line rewrite wastes months, and the short list of procedures that must really change.
    • When your team should stop writing to Japanese rules and start writing to the European ones.
  2. 2Rebuild your Pharmaceutical Quality System to meet EU Chapter 1

    • The pharmaceutical quality system sections that your Japanese manual leaves out and Chapter 1 expects.
    • What to put in a management review record so an inspector sees senior people reading the data.
    • How to run the Chapter 1 product quality review so trends show up before the inspector points them out.
  3. 3Document staff competence so it satisfies EU Chapter 2

    • Why a Japanese job description fails the Chapter 2 key personnel check, and what to write instead.
    • How to build a training matrix that links each operator to each procedure and shows when training is due.
    • The assessment record that proves an operator can do the task, not only that they attended.
  4. 4Upgrade facility and equipment records to meet EU Chapter 3 and Annex 15

    • What to check in your cleanroom and maintenance logs before an inspector opens the binder.
    • How to lay out a qualification protocol under Annex 15 so each test links back to a stated requirement.
    • Why a validation file that is complete in Japan can still look unfinished to a European inspector.
  5. 5Secure batch records and data integrity under EU Chapter 4

    • How to review an electronic audit trail the way a European inspector reads it, entry by entry.
    • The fields a batch record needs so a European Qualified Person can trace each step without calling you.
    • When a paper record can go to the archive and when it must stay within reach on the shop floor.
  6. 6Set up in-process controls that satisfy EU Chapter 5

    • What to do when an in-process check fails halfway through a batch bound for Europe.
    • The in-process limits and records that Chapter 5 expects an operator to write down at the line.
    • How to show an inspector that your cross-contamination controls work, with the records beside them.
  7. 7Validate analytical methods to meet EU Chapter 6

    • How to handle an out-of-specification result so the investigation file stands up to Chapter 6.
    • What a reference standard record must show before a European inspector accepts the result it supports.
    • Why a method validation report that passed in Japan can fail a European review, and the fix.
  8. 8Qualify suppliers and draft agreements for EU Chapter 7

    • What goes into a technical agreement with a European contract manufacturer, clause by clause.
    • How to audit a raw material supplier so your report holds up under European GMP.
    • The responsibilities that stay with you as contract giver, even when a partner does the work.
  9. 9Manage complaints and recalls under EU Chapter 8

    • The test for deciding when a quality defect must be reported to European authorities under Chapter 8.
    • How to write a corrective and preventive action plan an inspector can follow from root cause to proof.
    • What to do when a complaint from Europe needs a joint investigation with your site in Japan.
  10. 10Answer European inspectors with confidence during your site audit

    • How to set up a document room that puts the requested record in the inspector's hands within minutes.
    • The requests that usually come first in the opening meeting, and who on your team answers each.
    • What to say when an inspector points to a gap in your Japanese quality system.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Japan companies. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team