PharmaLectures.com

Courses › Pharma training by country › From Indian GMP to EU GMP: the gap list, and how to close it

From Indian GMP to EU GMP: the gap list, and how to close it

Your Indian site faces the European inspector with the gap list already closed.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • India companieswho it is written for

Why this training matters

The European inspector asks for a batch record, and your Schedule M procedure does not match EudraLex Volume 4. The findings go on a list with a deadline. Your quality team spends the next months rewriting procedures while shipments to Europe wait.

What changes after this course

Your team writes deviations, change controls and audit trail reviews in the language of European Good Manufacturing Practice from the first draft. You hold a certificate for each learner and a training record for each person. The inspector sees a team that can show its work.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your quality assurance team stops guessing what EudraLex Volume 4 asks for. They map each Schedule M procedure to its European counterpart, rewrite the Quality Manual along International Council for Harmonisation Q10 lines, and walk into the opening meeting with a Pharmaceutical Quality System they can prove on paper.

At the computer, operators and supervisors set up audit trails and electronic signatures the way Annex 11 demands, and a manual entry error gets corrected in a way the record explains. The training manager rebuilds the matrix so each operator has a competency record that stands up under Chapter 2.

On the floor and in the lab, answers arrive faster. Engineers qualify equipment to Annex 15, production sets in-process checks to Chapter 5, and analysts run Out-of-Specification investigations to Chapter 6 without a retest that looks like testing into compliance. Annex 1 layout questions get a drawing, not a debate.

Deviation reports and change controls come out right the first time under Chapter 1. Supplier audits follow Part II and Chapter 5, so every starting material question has a file behind it. When the inspector walks the site, your people answer the question asked and produce the Site Master File on request.

Who needs this training

  • Quality Assurance Manager

    You rewrite the Quality Manual on weekends because Schedule M and EudraLex Volume 4 do not line up. Here you get the map and the wording, so the rewrite happens once.

  • Production Head

    Batches wait in quarantine because an in-process check does not match Chapter 5. You leave with checks placed where they catch drift, and a record the Qualified Person can read.

  • Quality Control Laboratory Manager

    An inspector questions your Out-of-Specification investigation and asks why a retest happened. You answer from a Chapter 6 procedure that your analysts already follow.

  • Training and Development Manager

    The auditor asks how you know an operator is competent, and the matrix only shows a signature. You leave with Chapter 2 records that show competence and the effect of training.

Roles: Quality assurance and Qualified Person, Quality control and laboratory, Production and engineering

Businesses: every kind of pharma company

Countries: India

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Map a Schedule M procedure to the matching EudraLex Volume 4 requirement and record the difference in a written gap list.
  2. Rewrite a Quality Manual section so it states the responsibilities and management review duties that Chapter 1 expects.
  3. Check a computerised system against Annex 11 and name the missing audit trail or electronic signature controls.
  4. Build a training record for one role that shows competency and training effectiveness, as Chapter 2 expects.
  5. Place in-process checks in a batch process and set the action to take when a critical parameter drifts.
  6. Investigate an Out-of-Specification result as Chapter 6 requires, without retesting to a pass, and write up the finding.
  7. Write a root cause statement and a corrective and preventive action plan for a deviation under Chapter 1.

What the company gets

  • Your site goes into a European inspection with its Schedule M gaps already listed and closed, not discovered on the day.
  • Your Quality Manual is rewritten once, to European expectations, so your quality team spends its time on product release instead of rewrites.
  • Your people answer data integrity questions by showing the Annex 11 audit trail, not by promising to look it up.
  • Your deviation reports and change controls go out right the first time, so fewer come back from European reviewers for rework.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Map Schedule M to European Good Manufacturing Practice line by line

    • How to build a clause-by-clause map from Schedule M to EudraLex Volume 4 that your team can keep current.
    • The EudraLex Volume 4 chapters to check first, so rewrite time goes where the gaps hurt most.
    • What to do when a Central Drugs Standard Control Organisation rule and a European requirement differ.
  2. 2Rewrite your Quality Manual to meet European regulatory expectations

    • Why a quality system built for Schedule M falls short of Chapter 1, and where the gap shows first.
    • The key personnel responsibilities Chapters 1 and 2 expect, written so nobody argues over them.
    • How to run a management review that hands the inspector proof of quality oversight in the minutes.
  3. 3Secure your audit trails to pass an Annex 11 data integrity check

    • How to set Annex 11 controls on your computerised systems so access and changes leave a trace.
    • The audit trail and electronic signature gaps that become data integrity findings, and the fix.
    • What to do when an operator makes a manual entry error on a batch record headed to Europe.
  4. 4Prove your staff competency to satisfy European Chapter 2 requirements

    • Why a training matrix that only lists who read the procedure still falls short of Chapter 2.
    • How to show that training worked, with a record the inspector can check against what the operator does.
    • How to write a job description for key personnel that matches what Chapter 2 expects them to do.
  5. 5Upgrade your facility layout for Annex 1 sterile manufacturing

    • How to check your floor plan against Annex 1 and catch airlock and flow faults before the inspector.
    • The contamination control strategy Annex 1 asks for, and how to write one your site can defend.
    • When to upgrade your environmental monitoring and when your current setup already suffices.
  6. 6Set up in-process controls that prevent European batch rejections

    • How to place in-process checks where they catch a drifting batch before release testing does.
    • The starting material checks at dispensing that prevent a rejection at the end.
    • What to do when a critical process parameter drifts during a run for a European customer.
  7. 7Run your Quality Control laboratory to European Chapter 6 standards

    • How to investigate an Out-of-Specification result under Chapter 6 without retesting your way to a pass.
    • How to format method validation reports to International Council for Harmonisation Q2 so they pass review.
    • How to check your sample retention policy against Annex 19 before the inspector asks for a retained sample.
  8. 8Close deviations and corrective actions the way Chapter 1 demands

    • How to write a root cause statement that a Chapter 1 reviewer accepts without sending it back.
    • The corrective and preventive action plan that closes a deviation instead of reopening it.
    • What to do when a change control touches a product you already shipped to Europe.
  9. 9Audit your starting material suppliers for European compliance

    • How to audit an active pharmaceutical ingredient supplier against Part II of EudraLex Volume 4.
    • What an inspector looks for in your incoming material sampling procedure, and how to show it.
    • When to accept a supplier certificate of analysis and when you must test the material yourself.
  10. 10Answer the European inspector during a facility tour

    • The Site Master File and other documents to place on the table before the opening meeting.
    • How to answer when the inspector finds a gap in a batch manufacturing record while standing beside you.
    • What to write in your formal response to an observation so the agency can close it.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for India companies. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team