PharmaLectures.com

Courses › Pharma training by country › From Chinese GMP to EU GMP: the gap list, and how to close it

From Chinese GMP to EU GMP: the gap list, and how to close it

Your Chinese site answers a European inspector from its own files, first time.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • China companieswho it is written for

Why this training matters

A European Union (EU) inspector asks for the risk assessment behind a change you made last year. Your file holds only the approval that satisfied Chinese inspectors. The finding goes on the report, batch release slows while your team answers it, and the market application waits.

What changes after this course

After the course, your team rewrites change control, training and data procedures to the standard of EU Good Manufacturing Practice (GMP) the first time. You hold a certificate per learner and a per-person training record, backed by a recorded questionnaire for each module.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your quality head stops guessing where Chinese practice and European expectations part ways. The gap list from the National Medical Products Administration side to EudraLex Volume 4 Part I is already on paper, ranked by what an inspector sees first. Management review, change control and the product quality review follow International Council for Harmonisation Q10 and Chapter 1, so the answer is in the file when the question comes.

On the production floor, operators and supervisors work to Chapter 5 and Chapter 3 without a translator in the room. Cleaning, segregation and equipment records line up with what inspectors check. Training files follow Chapter 2, so when someone asks who was trained on a procedure and whether it worked, the answer is a record, not a memory.

Information technology and quality staff set up user access, audit trails and validation files to Chapter 4 and Annex 11 before the next inspection is announced. Batch record review includes the audit trail check. The data integrity questions an inspector asks about your electronic systems get a one-page answer, not a week of searching.

Regulatory affairs and quality control close the loop with partners and the authority. Technical agreements follow Chapter 7, out-of-specification investigations follow Chapter 6, and recalls and complaints follow Chapter 8. Self-inspections under Chapter 9 turn each finding into a dated action, so an external audit report is met with a plan, not a surprise.

Who needs this training

  • Quality Assurance Manager

    Owns the procedures an inspector opens first. Uses the gap list to rewrite change control and management review to Chapter 1 once, and keeps the evidence in one place.

  • Head of Production

    Faces the question of whether a shared line can run the next product. Uses the Chapter 5 cross-contamination controls to answer on the spot, and keeps the batch record intact when a live run needs adjusting.

  • Regulatory Affairs Specialist

    Works with Quality on the technical agreement with the contract manufacturer before a submission goes in. Uses the Chapter 7 structure to show who tests, who releases and who answers to the inspector.

  • Information Technology Systems Administrator

    Gets the Annex 11 request for the access list and the audit trail review. Leaves the meeting with a documented process for both instead of a promise to look into it.

  • Internal Quality Auditor

    Plans the Chapter 9 self-inspection programme and must report findings with owners and dates. Walks out with a report format and a way to follow each action to closure.

Roles: Quality assurance and Qualified Person, Quality control and laboratory, Production and engineering

Businesses: every kind of pharma company

Countries: China

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. List the gaps between your current procedures and EudraLex Volume 4 Part I, ranked by what an inspector checks first.
  2. Write a management review and a change control record that show the risk assessment Chapter 1 expects.
  3. Set user access and an audit trail review for each computerised system under Annex 11.
  4. Keep a training record per person that shows what they were trained on and how effectiveness was checked under Chapter 2.
  5. Draft a technical agreement under Chapter 7 that names who tests, who releases and who answers an inspector.
  6. Run an out-of-specification investigation under Chapter 6 from first result to documented decision.
  7. Plan a Chapter 9 self-inspection and record each finding with an owner and a due date.

What the company gets

  • Your quality unit holds a ranked gap list against EudraLex Volume 4, so resources go to the findings an inspector would raise first.
  • Your electronic records come with access rules and audit trail reviews that answer Annex 11 questions on the day.
  • Your technical agreements with contract manufacturers name who tests, who releases and who handles complaints, so a rejected batch does not become a dispute.
  • Your team holds a certificate per learner and a per-person training record, ready to hand over when an inspector asks who was trained.
  • Your self-inspections find problems first, and each one has an owner and a due date before an external auditor asks.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Find the gaps between National Medical Products Administration and EU GMP

    • Why a procedure that satisfied a Chinese inspector can still draw a finding from a European one.
    • How to build a gap list, chapter by chapter, that your quality head can defend to a board.
    • The questions an EU inspector asks first, and which of your current records answer them.
  2. 2Align your quality management system with EudraLex Part I expectations

    • How to write a management review that shows your quality system working, as Chapter 1 expects.
    • The change control step that proves a risk assessment was done before the change, not after.
    • What to do when an inspector asks for the product quality review and it is still in draft.
  3. 3Prove your people meet EU GMP Chapter 2 training and hygiene standards

    • How to keep training records that show who was trained, on what, and whether it worked.
    • The hygiene rules for entering production areas that Chapter 2 expects you to write down and enforce.
    • What to put in the job descriptions of key personnel so responsibilities are clear on inspection day.
  4. 4Document your premises and equipment to the EU GMP Chapter 3 standard

    • How to keep calibration and maintenance records that match the equipment list on the floor.
    • The layout and cleaning records that let an inspector walk your site without stopping to ask.
    • What to do when equipment is found out of calibration and batches have already used it.
  5. 5Secure your electronic records to meet EU GMP Chapter 4 and Annex 11

    • How to set user access so each person in the system can do only what their job needs.
    • Why a review of the audit trail belongs inside batch record review, and how to schedule it.
    • The validation file for a computerised system that Annex 11 expects you to hold from day one.
  6. 6Set up EU GMP Chapter 5 production controls that stop cross-contamination

    • How to set up cleaning and segregation so one product never carries into the next.
    • The questions to ask about a shared line before you plan a campaign, as Chapter 5 requires.
    • What to do when a process step needs adjusting during a live run and the batch record must still hold.
  7. 7Run quality control and out-of-specification reviews the Chapter 6 way

    • How to write an out-of-specification investigation an inspector can follow from first result to decision.
    • The analytical method transfer file that shows the receiving laboratory gets the same result.
    • What to keep from your ongoing stability programme so the data supports the shelf life on the label.
  8. 8Draft technical agreements that pass EU GMP Chapter 7 scrutiny

    • How to split responsibilities line by line between you and the contract manufacturer.
    • The audit of a contract acceptor that shows you kept oversight, and the record that proves it.
    • Why a technical agreement that leaves testing unassigned ends in arguments over a rejected batch.
  9. 9Structure recalls and corrective and preventive actions for Chapter 8

    • How to take a complaint from first report to a closed investigation an inspector accepts.
    • The recall procedure steps that let you act fast, with named people and a procedure checked on a schedule.
    • When a corrective and preventive action closes a complaint and when it only hides a repeat cause.
  10. 10Pass EU GMP Chapter 9 self-inspections with audits you run yourselves

    • How to plan self-inspections that find your problems before an EU inspector does.
    • The report format that turns a self-inspection finding into a dated action with an owner.
    • What to do the day an external audit report arrives with findings you did not expect.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for China companies. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team