PharmaLectures.com

Courses › Pharma training by country › From Brazilian and Latin American GMP to EU GMP: the gap list, and how to close it

From Brazilian and Latin American GMP to EU GMP: the gap list, and how to close it

Close the gaps to European manufacturing rules before an inspector lists them.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Brazil and Latin America companieswho it is written for

Why this training matters

An inspector from a European authority reads your procedures against EudraLex Volume 4 and finds they answer different questions. The report lists gaps in your quality system and electronic records. Your export approval waits while the team rewrites procedures.

What changes after this course

Before the inspection, your team maps each local procedure against EudraLex Volume 4 and rewrites the ones that fall short. You hold a certificate per learner and a per-person training record that shows who was trained on what.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your quality assurance team stops debating what EudraLex Volume 4 asks for and starts writing procedures that match it. They sort your lines against the right Annex, apply Annex 11 to electronic batch records, and bring the Pharmaceutical Quality System up to Chapter 1 and International Council for Harmonisation Q9 expectations.

Production managers update cross-contamination controls to Chapter 5 before the next multi-product campaign starts. In the laboratory, an Out-of-Specification result gets investigated the way Chapter 6 expects, so one analyst's slip stays a laboratory matter and does not turn into a held shipment.

Site directors sign Chapter 7 technical agreements that hold contract manufacturers and testing laboratories to the standard you hold yourself. When a complaint arrives, the team follows Chapter 8 for recalls and uses Chapter 9 self-inspection to find gaps before an outside auditor does. The site master file is ready on day one.

Training coordinators build a Chapter 2 qualification matrix that shows who is competent for which task. At the end, you hold a certificate per learner and a per-person training record, so the proof of training sits in your files before the inspector asks.

Who needs this training

  • Quality Assurance Manager

    You stop rewriting procedures and hoping. You sort each one against EudraLex Volume 4 and Chapter 1, then hand your director a gap list with an owner beside every line.

  • Regulatory Affairs Specialist

    A European authority asks for Good Manufacturing Practice evidence for your dossier. You know which documents answer, from the site master file to the response letter, and you request them in time.

  • Head of Production

    The auditor walks the line and asks about line clearance and cross-contamination. You answer from Chapter 5 and point to the control that is already running.

  • Laboratory Manager

    An Out-of-Specification result lands late on a Friday. You open the Chapter 6 investigation route in front of you instead of improvising one with the analyst.

  • Training and Development Coordinator

    The inspector points at an operator and asks for proof of training. You open the Chapter 2 matrix, and the per-person record answers at once.

Roles: Quality assurance and Qualified Person, Quality control and laboratory, Production and engineering

Businesses: every kind of pharma company

Countries: Brazil and Latin America

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Produce a written gap list that sets each local procedure against the matching chapter or Annex of EudraLex Volume 4.
  2. Check an electronic batch record system against Annex 11 and record what the audit trail shows about each change.
  3. Write cross-contamination control measures under Chapter 5 for a facility that makes more than one product.
  4. Investigate an Out-of-Specification result in the order Chapter 6 expects and document each step.
  5. Draft a Chapter 7 technical agreement that names what the contract manufacturer or laboratory answers for.
  6. Build a training matrix that shows, role by role, who is qualified for which task under Chapter 2.
  7. Assemble a site master file and the day-one document set that a European inspector asks for.

What the company gets

  • Your site enters a European inspection with its gap list already written and an owner already assigned to each fix.
  • Your quality team stops debating how to read EudraLex Volume 4 and spends that time updating procedures.
  • You hold a certificate per learner and a per-person training record, ready for the auditor who asks who was trained on what.
  • Your contract manufacturers and laboratories work under written Chapter 7 agreements, so a supplier's shortcut meets a document that already answers it.
  • Your documentation matches what inspectors ask for, so a request on day one is answered from the file and not from memory.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonStandard4 h 10 min
Production and engineeringStandard4 h 10 min
Quality control and laboratoryStandard4 h 10 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Build your gap list against EudraLex Volume 4 and its Annexes

    • How to turn EudraLex Volume 4 into a gap list your quality director can sign off.
    • The sorting step that tells you which Annex applies to each of your production lines.
    • Which body answers your question: a national competent authority or the European Medicines Agency.
  2. 2Bring your Pharmaceutical Quality System up to Chapter 1 expectations

    • Why a Product Quality Review that only lists data still fails Chapter 1, and what to add.
    • How to put International Council for Harmonisation Q9 risk management into daily decisions.
    • The Pharmaceutical Quality System changes that keep a finding at minor instead of major.
  3. 3Test your electronic systems against EudraLex Annex 11 and data integrity

    • How to show an inspector that your electronic batch record keeps who changed what, and when.
    • The legacy software gap inspectors check early, and the fix you can document.
    • What to do when an operator overwrites a critical process parameter by mistake.
  4. 4Show inspectors that your people meet Chapter 2 personnel requirements

    • Why your job descriptions for key personnel fall short of Chapter 2, and the lines to add.
    • How to build a training matrix that shows an auditor who is competent for which task.
    • What to hand over when an inspector questions an operator at the line about training.
  5. 5Qualify premises and calibrate instruments for a Chapter 3 inspection

    • How to walk your layout and spot the Chapter 3 problems before they hold a batch.
    • The calibration records that protect your batch when a sensor drifts out of specification.
    • What Annex 11 asks of computerised system validation, and what to add to your validation plan.
  6. 6Set up Chapter 5 production controls that stop cross-contamination

    • How to design a cross-contamination plan for a line that runs more than one product.
    • The in-process controls in Chapter 5 that stop a small deviation from spoiling a whole batch.
    • What a Corrective and Preventive Action plan looks like when an auditor accepts it.
  7. 7Run Out-of-Specification investigations that satisfy Chapter 6

    • How to record an Out-of-Specification result so it shows your laboratory is in control.
    • Which stability testing steps to check against International Council for Harmonisation Q1 rules.
    • Why reference standard storage can trigger a Chapter 6 finding, and what to log.
  8. 8Draft Chapter 7 agreements that hold your suppliers accountable

    • How to draft a technical agreement that tells a contract manufacturer exactly what it answers for.
    • The supplier qualification steps that keep unapproved raw materials out of your plant.
    • What to look for when you audit a third-party testing laboratory for European compliance.
  9. 9Write recall and self-inspection procedures to Chapters 8 and 9

    • How to classify a product complaint so it reaches the right European reporting route.
    • The order of steps to start a market recall, and who signs at each one.
    • Why routine self-inspections miss gaps an outside auditor spots quickly, and how to fix that.
  10. 10Assemble the documentation package an inspector asks for on day one

    • The site master file format that puts an inspector at ease on the first morning.
    • How floor operators answer an auditor's question without guessing or going silent.
    • What to write in the response letter so the inspection finding closes and stays closed.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Brazil and Latin America companies. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team