PharmaLectures.com

Courses › Pharma training by line of business › Europe playbook for the packaging and machinery supplier: licences, documents, customers, cost

Europe playbook for the packaging and machinery supplier: licences, documents, customers, cost

Your machines pass the first European client review, and your installers stay on site.

  • 12 audio modulesthree lengths each
  • 2 h to 10 hbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Packaging and machinery supplierwho it is written for

Why this training matters

Your installation crew stands idle in a European pharmaceutical plant. The client's quality manager has rejected the Declaration of Conformity because the Technical Documentation File has gaps. Engineers rewrite it for weeks, and final payment slips into the next quarter.

What changes after this course

Your engineers, sales staff and logistics team answer the buyer's compliance question before it is asked. Files, qualification protocols and shipping papers are right the first time. You hold a certificate per learner and a per-person training record.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your engineers decide on the drawing board whether a machine falls under Machinery Directive 2006/42/EC, and what Annex I asks of it, instead of finding out in the client's audit. They compile the Technical Documentation File as the design grows, check the control cabinet against the Electromagnetic Compatibility Directive 2014/30/EU, and sign a Declaration of Conformity that names the right standards.

In the buyer meeting, your sales manager answers the European Union Good Manufacturing Practice Annex 1 question on contamination control without calling the design office. The answer points to cleanable surfaces, enclosed product paths and the risk assessment under EN ISO 12100. Project managers then write Installation and Operational Qualification protocols that follow the client's user requirement specification line by line, in step with Annex 15.

Logistics staff pick the Combined Nomenclature code and the Incoterms 2020 rule before the quotation is sent, so duty and damage risk are priced in. The crate leaves with the right invoice, packing list and customs declaration. Heavy machinery reaches the plant on the date you promised, and the installation crew starts work instead of waiting.

After handover, a complaint from the plant lands in a log that traces it to the machine, the part and the corrective action. The rollout plan carries lines for notified body fees, translations and contingency, so your board sees the real cost of Europe before it commits.

Who needs this training

  • Head of Regulatory Affairs

    The Declaration of Conformity is due and the Technical Documentation File is still scattered across three departments. After the course, the file follows Annex VII from the first drawing, and the declaration names the right directives and standards.

  • European Sales Manager

    A pharmaceutical buyer asks how your packaging line supports Annex 1, and you need the answer in the meeting, not next week. The course gives you that answer and the evidence behind it.

  • Product Development Engineer

    The prototype fails Electromagnetic Compatibility testing just before shipment. With the course, you choose drives, cables and shielding against Directive 2014/30/EU at the first sketch, not after the test lab's report.

  • Operations Director

    A crate of machinery sits at a European port because the customs papers do not match the goods. You set up the codes, documents and Incoterms 2020 terms that let the next one pass.

  • Project Manager, Site Installation

    The client's validation lead returns your Operational Qualification protocol with comments on every page. You write it against their user requirement specification and Annex 15, and it is accepted the first time.

Roles: Owner, CEO and board, Business development and export sales, Regulatory affairs

Businesses: Packaging and machinery supplier

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Decide whether a machine needs CE marking under Machinery Directive 2006/42/EC and name the conformity route you will follow.
  2. Compile a Technical Documentation File against Annex VII and draw up a Declaration of Conformity with the content Annex II requires.
  3. Record hazards and protective measures in a machinery risk assessment that follows EN ISO 12100.
  4. Answer a buyer's Annex 1 contamination control question using your own machine's design features.
  5. Write Installation and Operational Qualification protocols that follow a client's user requirement specification.
  6. Choose the Combined Nomenclature code and the Incoterms 2020 rule for a machine shipment and its spare parts.
  7. Build a European rollout budget that includes testing, translation, certification and contingency lines.

What the company gets

  • Your engineering department stops redesigning machines late, because the Machinery Directive and Electromagnetic Compatibility checks happen at the drawing stage.
  • Every Technical Documentation File and Declaration of Conformity leaves the building ready for a client's quality assurance review.
  • Your sales team gives pharmaceutical buyers straight answers about Annex 1 and qualification, so deals do not wait on a call to the design office.
  • Your machinery arrives at the plant with correct customs papers instead of sitting in a port.
  • Your training manager holds a certificate per learner and a per-person training record, ready for any client audit.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 12 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing2 h10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard5 h25 min a module, for regulatory, quality and business-development staff
Expanded10 h50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Owner, CEO and boardBriefing2 h
Business development and export salesBriefing2 h
Regulatory affairsStandard5 h

Course outline: 12 modules

12 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Plan your market entry on the European Union machinery legal framework

    • Why Machinery Regulation 2023/1230, replacing the Directive on 20 January 2027, shapes your quotes now.
    • How to tell which national market surveillance authority can stop your machine at the border.
    • The one-page plan that shows your board which rules apply before the first quotation leaves.
  2. 2Decide CE marking needs under Machinery Directive 2006/42/EC

    • When your machine falls under Annex IV and when internal checks on your own are enough.
    • How to match Annex I essential health and safety requirements to the clause an auditor will open.
    • What to do when a buyer asks for proof of conformity and your declaration is still a draft.
  3. 3Meet the Electromagnetic Compatibility Directive for your electrical equipment

    • Why one drive or sensor without proof of conformity can hold a whole machine at the dock.
    • The documents that show your control cabinet meets Directive 2014/30/EU, in the order an auditor asks.
    • How to keep a variable-speed drive from disturbing the vision camera next to it on the line.
  4. 4Draft Technical Documentation Files that pass European client review

    • The drawings, calculations and test reports Annex VII expects inside your Technical Documentation File.
    • How to word a Declaration of Conformity so it names the right directives and harmonised standards.
    • What a client's quality assurance manager checks first, and what makes them send the file back.
  5. 5Run machinery risk assessments using EN ISO 12100 safety principles

    • How to record each hazard, its risk and its protective measure in the order EN ISO 12100 sets out.
    • Why the three-step method puts safe design first, guards second and warnings last.
    • What to do when the site acceptance test starts and your risk assessment is not on the table.
  6. 6Align machinery design with European Union Good Manufacturing Practice

    • How to pick surfaces, joints and enclosures that an Annex 1 inspector can see are cleanable.
    • The contamination control strategy questions a buyer's quality unit will ask about your machine.
    • What to say when an inspector questions the cleanability of a gap, a hinge or a bolt head.
  7. 7Write Installation and Operational Qualification protocols for sterile sites

    • How to read the client's user requirement specification and turn it into protocol test steps.
    • Why a well-documented factory acceptance test can count toward qualification under Annex 15.
    • How to run Operational Qualification tests so the client's reviewer signs without a rewrite.
  8. 8Set up field service and complaint handling European Union buyers accept

    • The field service routine a pharmaceutical quality unit expects before it lets your engineer on site.
    • How to log each complaint so it can be traced to a machine, a part and a corrective action.
    • What your support duties look like once the machine runs, and where the contract should stop them.
  9. 9Clear European customs borders with accurate import documentation

    • How to choose the Combined Nomenclature code for a filling line, a spare part and a tool kit.
    • Why a missing Economic Operators Registration and Identification number can hold your cargo at the port.
    • How to calculate import duty on spare parts before the price list goes out, not after.
  10. 10Route heavy machinery shipments through European logistics networks

    • How to choose a carrier who has moved oversized crates and knows the route permits they need.
    • Which Incoterms 2020 rule puts the damage risk on you, and which moves it to the buyer.
    • What to do when a replacement part is stuck in transit and the line is down.
  11. 11Pitch your equipment to European pharmaceutical procurement teams

    • How to answer a procurement manager's supplier questionnaire in a way that shortens the audit.
    • The questions about your track record that pharmaceutical buyers ask, and the evidence that answers each.
    • Why offering qualification support in the first proposal speeds up the contract talks.
  12. 12Schedule your European market rollout and budget for hidden costs

    • How to lay out a timeline from conformity assessment to installation that your sales team can promise.
    • The hidden costs suppliers forget: notified body fees, translations, test reports and spare part stock.
    • Where to place contingency in the plan so a late test report does not push out the handover.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

12 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 2 h in the briefing length and 10 h in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Packaging and machinery supplier. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 108 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team