PharmaLectures.com

Courses › Pharma industry foundations › Day one, the inspectors arrive: how an EMA or national GMP inspection really runs

Day one, the inspectors arrive: how an EMA or national GMP inspection really runs

Your staff answer inspectors directly, so your next batch releases on schedule.

A GMP inspection is a visit by a medicines regulator to check that a site makes products in line with good manufacturing practice and its authorisations. In the European Union the inspections are carried out by national competent authorities; the European Medicines Agency coordinates inspections for centrally authorised products and keeps the EudraGMDP database where GMP certificates and statements of non-compliance are published. Third-country suppliers get inspected too, because an EU importer can only use an active substance or finished product from a site that holds valid GMP evidence.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • QA, production, managementwho it is written for

Why GMP inspection training matters

An inspector asks about an audit trail and your operator looks at the floor. The silence turns a routine tour into a major observation. Production stalls while your team writes corrective actions instead of releasing batches.

What changes after this course

Your team knows what inspectors ask for and hands over the right record the first time. Operators answer plainly and the inspection keeps its schedule. You hold a certificate for every learner and a training record for each person.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

GMP inspection training: what this course gives your people

Your site head stops guessing what the inspectors want to see first. The site master file and the batch records are staged against EudraLex Volume 4 before the notice arrives. The opening meeting stays on its agenda, and the first questions get short answers instead of a pile of papers that invites deeper probing.

Operators answer the inspector without glancing at their supervisor. They talk through their standard operating procedures and bring up the Annex 11 audit trail on the screen in front of them. Your system owners and quality team stop handing over raw data with no context from the data governance policy.

At the daily wrap-up, a preliminary finding gets a calm, factual reply, and a misunderstanding can end there instead of reaching the final report. Your quality assurance manager knows what to say and what to leave unsaid. By the closing meeting, the scope of any major deficiency is settled.

The written reply to the national competent authority names the true root cause, including for Annex 1 sterile manufacturing deviations. Corrective and preventive actions carry dates and evidence, and you close them on time. Your manufacturing licence stays out of question and supply keeps moving.

Who needs GMP inspection training

  • Quality Assurance Manager

    Faces the lead inspector in the opening meeting. When asked for a deviation report that is not yet approved, they already have the words to say what it is and when it will be.

  • Production Supervisor

    Escorts the inspection team through the sterile area. When an Annex 1 environmental monitoring alert comes up on the tour, they answer it briefly instead of telling a long story.

  • Data Integrity Specialist

    Pulls electronic batch records while the inspector watches. They show the Annex 11 audit trail that was asked for, and no unrelated system noise comes along with it.

  • Site Head of Operations

    Sits in the hot seat at the closing meeting. They accept a major observation with composure and leave the room with a realistic timeline for the response.

Roles: Owner, CEO and board, Quality assurance and Qualified Person, Production and engineering

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: Europe and the UK

Courses are in English. Other languages on request.

After this course your people can

  1. Stage the site master file and the batch records an inspector asks for first, before the notice arrives.
  2. Answer an inspector's direct question in the words asked for, and stop without volunteering extra information.
  3. Display the Annex 11 audit trail an inspector requests, live, from the system.
  4. Justify your environmental monitoring locations and gowning procedure against Annex 1 when an inspector challenges them.
  5. Reply to a preliminary finding at the daily wrap-up without arguing the final classification.
  6. Write a corrective and preventive action plan with a root cause, dates and evidence of a permanent fix.

What the company gets

  • Production lines keep running because your staff stop turning a routine question into a critical finding.
  • Corrective action plans reach the agency with a real root cause, dates and evidence attached.
  • The documents an inspector asks for are in the room on time, and the inspection keeps its schedule.
  • You hold a documented training record and a certificate for each person on your compliance team.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Owner, CEO and boardBriefing1 h 40 min
Quality assurance and Qualified PersonStandard4 h 10 min
Production and engineeringStandard4 h 10 min

GMP inspection course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Get your site ready for inspection under Directive 2001/83/EC

    • Why the site master file is the first thing inspectors read, and what it must already say.
    • The documents to stage in the inspection room so nobody runs to the archive on day one.
    • How to find the gaps in your batch records while there is still time to fix them.
  2. 2Run the inspector's arrival and opening meeting on your terms

    • What to do when the lead inspector asks for the site head before anyone has signed in.
    • How to hold the opening presentation to the scope the inspectors announced.
    • The first-question answer that turns a short check into a long one, and what to say instead.
  3. 3Walk the inspection team through your facility and records

    • How to agree a tour route that is orderly and keeps busy areas from being walked at the worst moment.
    • When to hand over one page and when a full binder is the wrong answer.
    • How to pull an archived document fast enough that the wait never becomes a finding.
  4. 4Coach production staff to answer inspector interviews directly

    • How to prepare operators to answer the question asked and stop there.
    • What happens when a supervisor cuts in on a technician, and how to prevent it before the interview.
    • The plain sentences your staff can say when they do not know the answer.
  5. 5Prove data integrity and Annex 11 compliance on the spot

    • How to show the audit trail the inspector asks for under Annex 11, live, on the first attempt.
    • Why shared generic logins sink an otherwise clean system, and how to retire them.
    • How to tell a plain data entry error from a manipulation finding before the inspector does.
  6. 6Present your Quality Management System without raising doubt

    • How to map deviations so the inspector sees one closed loop, not a pile of reports.
    • What to show when a change control has sat open for six months.
    • The standard operating procedure layout that lets an inspector find the answer in one read.
  7. 7Defend your sterile manufacturing against Annex 1 requirements

    • How to justify each environmental monitoring location against Annex 1 in a sentence.
    • Why inspectors ask for temperature mapping of your warehouse, and the evidence that answers them.
    • What to do when an inspector points at a flaw in your gowning procedure.
  8. 8Steer the daily wrap-ups and the final closing meeting

    • How to challenge a preliminary finding at the daily wrap-up without raising the temperature.
    • The tone to take when the lead inspector reads out a major deficiency.
    • Why you leave the final classification alone at the closing meeting, and what to do instead.
  9. 9Write replies to critical and major inspection findings

    • How to build a reply to a critical deficiency that fits the deadline the inspectorate sets.
    • The difference between a root cause analysis and an excuse, as the authority reads them.
    • What the formal reply to the national competent authority must say to be accepted.
  10. 10Close corrective and preventive actions on schedule

    • How to track each corrective and preventive action so no due date passes unnoticed.
    • Why closing an action too early invites a second look from the agency.
    • The evidence that proves a fix is permanent and not a one-off patch.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about GMP inspection training

What happens during a GMP inspection?

The inspection opens with a meeting where the inspectors state the scope, then moves through a site tour, document review and interviews. Inspectors follow a product backwards: the batch record, the deviations and changes around it, the testing, the training of the people who signed. Each day usually ends with a short feedback session. The closing meeting lists the observations, graded critical, major or other, and the written report follows later.

What is on a GMP inspection checklist?

European inspectors work from the EU GMP chapters and annexes rather than a single public checklist. Expect requests for the site master file, the quality manual, the deviation and CAPA log, change controls, the product quality reviews, the training matrix and records, qualification and validation status, supplier approval files, complaint and recall records, and audit trail reviews on key systems. The course walks through what a good answer to each request looks like.

How long does an EMA inspection last?

There is no fixed length. The inspecting national authority plans the days from the size of the site, the products in scope and the previous history; a routine inspection of a single-dosage-form site is often a few days, while a large multi-product site or a for-cause inspection takes longer. The written report and the company response cycle add weeks after the visit, and the GMP certificate or non-compliance statement is then published in EudraGMDP.

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for QA, production, management. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team