PharmaLectures.com

Courses › GMP, GDP, quality and compliance › Contamination control strategy under the new Annex 1: the document inspectors now ask for first

Contamination control strategy under the new Annex 1: the document inspectors now ask for first

Your Contamination Control Strategy is on the desk before the inspector asks.

  • 10 audio modulesthree lengths each
  • 1 h 40 min to 8 h 20 minbriefing to expanded
  • Workbook, transcript, certificateand a recorded quiz per module
  • Production, QAwho it is written for

Why this training matters

On day one, the inspector asks for your Contamination Control Strategy. Quality Assurance hands over separate procedures, and the inspector cannot see the link Annex 1 expects. A deficiency goes on the report and the inspector doubts your control of contamination.

What changes after this course

Production and Quality write one strategy that ties each control to patient safety, and they answer inspector questions in Annex 1 terms. You hold a certificate for each learner and a training record per person, with a recorded questionnaire result for every module.

Watch the pitch

3:43 on how an audio course is bought, listened to and recorded. Full screen, one click.

Watch the pitch3:43, full screen, one click

What this course gives your people

Your Quality Assurance lead hands the inspector a Contamination Control Strategy that meets European Union Good Manufacturing Practice Annex 1, and it holds together. Cleanroom design, personnel flow and equipment maintenance sit in one document, each tied to the risk it controls. The question on day one no longer sends anyone to the filing cabinet.

Production managers use International Council for Harmonisation Q9 on the daily plan. They spot the moment in an aseptic intervention where risk peaks, and they change how operators move before an excursion happens. Environmental monitoring results start deciding your cleaning rotation instead of filling a spreadsheet.

When a viable count passes its action limit, your cleanroom supervisor starts the cause investigation at once and passes the findings to Quality Assurance for a Corrective and Preventive Action. Validation engineers defend each disinfectant choice with efficacy data and contact times, so the sporicidal agent in your rotation has evidence behind it.

Facility directors route materials so they cannot cross a people path. They keep water for injection and compressed gas utilities in good order and catch a failing seal before it reaches product. Sterile components reach the filling line with container closures free of particles, from the warehouse door onward.

Who needs this training

  • Production Manager

    A new aseptic filling line is on the drawing board. They map every operator intervention to Annex 1 before qualification, so the line passes first time without a redesign.

  • Quality Assurance Specialist

    An auditor asks why the environmental monitoring samplers sit where they do. They open the strategy, point to the risk assessment behind each location, and the question ends there.

  • Cleanroom Operations Supervisor

    A surface swab comes back with a high count. They start the investigation in the right order and show the inspector that the room is still in a state of control.

  • Validation Engineer

    They are writing the protocol for a new sporicidal agent. They set the contact times and the rotation in it, with the evidence that keeps the cleanroom compliant.

Roles: Quality assurance and Qualified Person, Production and engineering

Businesses: every kind of pharma company

Countries: India, China, Türkiye, Korea, Japan, Taiwan, Egypt, Gulf and MENA, Brazil and Latin America, Pakistan, Bangladesh and Vietnam, United States, Europe

Selling into: any jurisdiction

Courses are in English. Other languages on request.

After this course your people can

  1. Write a site-specific Contamination Control Strategy that meets current European Union Good Manufacturing Practice Annex 1 expectations.
  2. Rank contamination hazards with a formal Quality Risk Management tool and record the rating and its reasoning in the file.
  3. Specify pressure differentials between cleanroom grades that keep air moving away from open product.
  4. Place environmental monitoring samplers by operator movement and write the reason for each location.
  5. Draft a validation protocol for a cleanroom disinfectant and a sporicidal agent, including contact times.
  6. Replace aseptic intervention techniques that expose sterile components with a planned, rehearsed method.
  7. Audit utility systems for maintenance gaps and raise a Corrective and Preventive Action before they cause contamination.

What the company gets

  • Your site goes into inspection with a Contamination Control Strategy that answers the aseptic control questions and links each control to the risk it addresses.
  • The master strategy document sits on the desk, current and cross-referenced, before the inspector asks for it.
  • Filling lines keep running because operators see a drift in monitoring data and act on it before a batch is rejected.
  • Your quality unit spends less time on recurring deviations, because each Corrective and Preventive Action removes the cause.
  • Each learner holds a certificate, and you hold a training record per person to show the inspector.

The evidence: questionnaire, training record, certificate

EU GMP Chapter 2, section 2.11, and 21 CFR 211.25 both ask for training that is documented and shown to work. This is what each learner leaves behind.

A recorded questionnaire per module

Every one of the 10 modules ends with a multiple-choice questionnaire. The result is recorded per person with a timestamp, whichever of the three lengths the person listened to.

A per-person training record

The export lists each learner, each module, the result and the date, which is the training record EU GMP Chapter 2 and 21 CFR 211.25 ask you to keep and the first thing an inspector asks for.

A certificate per learner

Name, company, course, hours, the guideline version taught and the date. It documents in-company training; it is not a professional qualification or an accreditation.

Your pass mark, your rule

There is no fixed pass mark. Your quality or human-resources manager decides what counts as passed and when a module is retaken, exactly as your training procedure says.

Delivered within 72 hours of payment, with the workbook, the full transcript and a source for every fact in the audio.

How long it takes, by who is listening

Nobody spends a day in a classroom. Every module exists in three lengths; a person takes the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Briefing1 h 40 min10 min a module, for executives, sales and anyone who must know the rules, not run them
Standard4 h 10 min25 min a module, for regulatory, quality and business-development staff
Expanded8 h 20 min50 min a module, for technical staff who run the procedure day to day
Who takes this courseLengthTotal time
Quality assurance and Qualified PersonExpanded8 h 20 min
Production and engineeringExpanded8 h 20 min

Course outline: 10 modules

10 modules. Under each title are the three things the listener can do afterwards; the audio itself runs 10 to 50 minutes depending on the length chosen.

  1. 1Apply European Union Good Manufacturing Practice Annex 1 to your site

    • How to show an inspector which Annex 1 changes reach your lines and which do not.
    • The gap list you build in one pass, so you know what to fix before the inspection date.
    • Why Annex 1 asks for one linked strategy, and the plain answer to give when the inspector says so.
  2. 2Draft a Contamination Control Strategy an inspector can read in one sitting

    • How to lay out the strategy so the inspector finds the answer in the first minute.
    • The links to your Pharmaceutical Quality System that stop the document sitting alone on a shelf.
    • When to revise the strategy after a process change, and what to record so the revision stands up.
  3. 3Use Quality Risk Management to find the contamination hazards nobody logged

    • How to pick the risk tool that exposes your weakest step, not the one that is easiest to fill in.
    • The way International Council for Harmonisation Q9 turns a line walk into named control points.
    • What to write in the risk evaluation so a skeptical auditor accepts your rating without a debate.
  4. 4Set up cleanrooms and air flow so contamination cannot cross between areas

    • How to match each cleanroom grade to the step it protects, so no room is over-built or under-built.
    • The pressure pattern that pushes air away from open product, and how to show it on a drawing.
    • What to do when a material path crosses a people path and the layout cannot change this year.
  5. 5Fix your environmental and personnel monitoring schedules and defend them

    • Where to put samplers where operators shed most, and the reason you can give for each location.
    • How to read a trend so you act on the drift before it becomes an excursion that stops production.
    • The gowning steps operators skip between grades, and the check that catches each one.
  6. 6Choose and validate disinfectants for your critical manufacturing surfaces

    • How to build a disinfectant rotation that reaches the full range of organisms found on your site.
    • The validation evidence that shows your sporicidal agent clears critical surfaces, ready for the file.
    • Why contact time decides whether a cleaning step counts, and how to write it into the procedure.
  7. 7Stop microbial breaches during aseptic processing interventions

    • How to sort interventions into inherent and corrective, so each one has a planned, rehearsed method.
    • The hand and arm movements that keep operators from reaching over open containers in Grade A.
    • Why speed in the critical zone raises risk, and the pace to train into every operator.
  8. 8Maintain utilities and production equipment to block contamination routes

    • How to set water for injection sampling that answers the microbial limits inspectors check.
    • The maintenance checks that catch a failing seal before it becomes a deviation.
    • Why a sanitary design flaw defeats a good sterilization cycle, and how to spot one on a walkdown.
  9. 9Transfer sterile materials and components without losing their integrity

    • How to write receipt steps that keep contaminated outer packaging out of your warehouse.
    • The transfer method that moves sterile components into higher grades without breaking protection.
    • When to reject container closures for particles, and when a retest is enough.
  10. 10Audit your strategy and close deviations before the next inspection

    • How to log contamination control data so an inspector believes your claim of continuous improvement.
    • The audit schedule that keeps the strategy matching what operators do on the floor.
    • What a Corrective and Preventive Action must contain to stop the same deviation returning.
The founders

One of us was inspected. The other one pays for the training.

Every claim below is sourced on the about page: the medicines register, the Lithuanian Pharmaceutical Union board list, the university directory.

Justina Krukonytė-Racz

Justina Krukonytė-Racz

Co-founder. Licensed pharmacist.

GDPResponsible PersonWarehouse & logistics

Licensed pharmacist. Responsible Person at Tamro (PHOENIX group), where she led the GDP set-up of the distribution centre.

The Responsible Person is the named person the regulator holds accountable for every pallet that leaves the building.

She writes the modules around the procedures a GDP inspection checks. Board member of Lithuanian Pharmaceutical Union.

Listed in the Lithuanian medicines register as Pharmacist.

Prof. Ben Racz

Prof. Ben Racz

Co-founder. Builds the platform and is responsible for delivery, records and pricing.

Platform & deliveryQuantitative researchCarnegie Mellon

He was Professor of the Practice at the College of Engineering at Carnegie Mellon University, where he taught Advanced Quantitative Finance and Algorithmic Trading to MSc students.

He is the founder and Managing Director of Algorithmic Sciences, a scientific research and consulting firm. Earlier he co-founded a data-driven growth consultancy, a data-science based wholesale trading company and an information security firm.

More about Ben at benracz.com

Questions about this course

Is there a certificate?

Yes. Every learner who finishes the course receives a certificate in their own name, and every module ends with a recorded multiple-choice questionnaire, so the certificate sits on top of a per-person training record. The certificate documents in-company training; it is not a professional qualification or an accreditation, and your quality or human-resources manager sets the pass mark and decides when a module is retaken.

How long does the course take?

10 modules, each in three lengths: a 10-minute briefing, a 25-minute standard run and a 50-minute expanded walk-through. The whole course takes 1 h 40 min in the briefing length and 8 h 20 min in the expanded length. People take the length their role needs, and every length ends with the same recorded questionnaire, so the training record is complete either way.

Who should take this course?

It is written for Production, QA. Owners, managers and sales staff hear the briefing length, regulatory, quality and business-development staff take the standard run, and the people who run the procedure every day get the expanded version. One licence covers one named person on this course for a year, so the same title can be rolled out across a whole team at once.

Is this training accepted as a GMP training record by an auditor?

EU GMP Chapter 2 and 21 CFR 211.25 require documented, effective training, and that is what the course produces: a recorded multiple-choice result per module and per person, a certificate per learner and a transcript of what was taught. No provider can promise acceptance by a specific inspector; the record is built to answer what inspectors ask for, and your quality manager decides the pass mark.

How is it delivered and how fast?

The course arrives as audio files with a companion workbook, a full transcript and the questionnaire per module, within 72 hours of your payment arriving. You host the files on your own system or share them as you like; there is no platform to log into and no learner management system to set up. The free sample module arrives on request, before any purchase.

What does it cost per learner?

The list price is 9 euros per module, per learner, per year, so this course is 90 euros for one person for twelve months. The price per learner falls as more people take the same course: 10 learners pay 10 percent less and the discount keeps growing to 50 percent at 1000 learners. Type a number on the price panel and the yearly total appears.

Get this course for your team

One licence is one person on this course for a year. All three lengths, the workbook, the certificate and the training record are included in every purchase. Pick how many people, add it to the cart, and you have an invoice in your inbox.

Free sample module

Hear one full module before you spend a cent. Send your company and the role you want trained, and a complete sample module comes back with its workbook and transcript.

Connect on WhatsApp

or email [email protected], or ask for a written quote for your team